Re: [PATCH v5 1/2] dt-bindings: net: motorcomm: Add pad driver strength cfg

[Andrew Lunn]

> +  motorcomm,rx-clk-drv-microamp:
> +    description: |
> +      drive strength of rx_clk rgmii pad.
> +      The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can
> +      be configured with hardware pull-up resistors to match the SOC voltage
> +      (usually 1.8V).
> +      The software can read the registers to obtain the LDO voltage and configure
> +      the legal drive strength(curren).
> +      =====================================================
> +      | voltage |        curren Available (uA)            |

current has a t.

> +      =====================================================
> +      | voltage |        curren Available (uA)            |

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

    Andrew