Re: [PATCH v11 3/4] hisi_acc_vfio_pci: register debugfs for hisilicon migration driver

From: liulongfang
Date: Sun Jul 23 2023 - 23:15:01 EST

Next message: Huang, Ying: "Re: [PATCH v2 2/3] mm/memory_hotplug: split memmap_on_memory requests across memblocks"
Previous message: sunran001: "[PATCH] drm/radeon: that open brace { should be on the previous line"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 2023/7/15 6:07, Alex Williamson wrote:
> On Fri, 30 Jun 2023 17:24:56 +0800
> liulongfang <liulongfang@xxxxxxxxxx> wrote:
>
>> From: Longfang Liu <liulongfang@xxxxxxxxxx>
>>
>> On the debugfs framework of VFIO, if the CONFIG_DEBUG_FS macro is
>> enabled, the debug function is registered for the live migration driver
>> of the HiSilicon accelerator device.
>>
>> After registering the HiSilicon accelerator device on the debugfs
>> framework of live migration of vfio, a directory file "hisi_acc"
>> of debugfs is created, and then three debug function files are
>> created in this directory:
>>
>> data file: used to get the migration data from the driver
>> attr file: used to get device attributes parameters from the driver
>> save file: used to read the data of the live migration device and save
>> it to the driver.
>> io_test: used to test IO read and write for the driver.
>>
>> Signed-off-by: Longfang Liu <liulongfang@xxxxxxxxxx>
>> ---
>> .../vfio/pci/hisilicon/hisi_acc_vfio_pci.c | 182 ++++++++++++++++++
>> .../vfio/pci/hisilicon/hisi_acc_vfio_pci.h | 11 ++
>> 2 files changed, 193 insertions(+)
>>
>> diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
>> index a1589947e721..a6f5e94bfaf2 100644
>> --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
>> +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
>> @@ -15,6 +15,7 @@
>> #include <linux/anon_inodes.h>
>>
>> #include "hisi_acc_vfio_pci.h"
>> +#include "../../vfio.h"
>>
>> /* Return 0 on VM acc device ready, -ETIMEDOUT hardware timeout */
>> static int qm_wait_dev_not_ready(struct hisi_qm *qm)
>> @@ -606,6 +607,18 @@ hisi_acc_check_int_state(struct hisi_acc_vf_core_device *hisi_acc_vdev)
>> }
>> }
>>
>> +static void hisi_acc_vf_migf_save(struct hisi_acc_vf_migration_file *src_migf,
>> + struct hisi_acc_vf_migration_file *dst_migf)
>
> Consider swapping the args to be more consistent with functions like
> memcpy() where the destination is the first arg and source is the
> second.>
OK, These two parameters can be swapped.

>> +{
>> + if (!dst_migf)
>> + return;
>> +
>> + dst_migf->disabled = false;
>> + dst_migf->total_length = src_migf->total_length;
>> + memcpy(&dst_migf->vf_data, &src_migf->vf_data,
>> + sizeof(struct acc_vf_data));
>> +}
>> +
>> static void hisi_acc_vf_disable_fd(struct hisi_acc_vf_migration_file *migf)
>> {
>> mutex_lock(&migf->lock);
>> @@ -618,12 +631,16 @@ static void hisi_acc_vf_disable_fd(struct hisi_acc_vf_migration_file *migf)
>> static void hisi_acc_vf_disable_fds(struct hisi_acc_vf_core_device *hisi_acc_vdev)
>> {
>> if (hisi_acc_vdev->resuming_migf) {
>> + hisi_acc_vf_migf_save(hisi_acc_vdev->resuming_migf,
>> + hisi_acc_vdev->debug_migf);
>> hisi_acc_vf_disable_fd(hisi_acc_vdev->resuming_migf);
>> fput(hisi_acc_vdev->resuming_migf->filp);
>> hisi_acc_vdev->resuming_migf = NULL;
>> }
>>
>> if (hisi_acc_vdev->saving_migf) {
>> + hisi_acc_vf_migf_save(hisi_acc_vdev->saving_migf,
>> + hisi_acc_vdev->debug_migf);
>> hisi_acc_vf_disable_fd(hisi_acc_vdev->saving_migf);
>> fput(hisi_acc_vdev->saving_migf->filp);
>> hisi_acc_vdev->saving_migf = NULL;
>> @@ -1303,6 +1320,164 @@ static long hisi_acc_vfio_pci_ioctl(struct vfio_device *core_vdev, unsigned int
>> return vfio_pci_core_ioctl(core_vdev, cmd, arg);
>> }
>>
>> +static int hisi_acc_vf_debug_check(struct seq_file *seq, struct vfio_device *vdev)
>> +{
>> + struct hisi_acc_vf_core_device *hisi_acc_vdev = hisi_acc_get_vf_dev(vdev);
>> + struct hisi_acc_vf_migration_file *migf = hisi_acc_vdev->debug_migf;
>> +
>> + if (!vdev->mig_ops || !migf) {
>> + seq_printf(seq, "%s\n", "device not support debugfs!");
>
> "device does not support debugfs"?
>
OK,"device does not support live migration"

>> + return -EINVAL;
>> + }
>> +
>> + /* If device not opened, the debugfs operation will trigger calltrace */
>> + if (!vdev->open_count) {
>> + seq_printf(seq, "%s\n", "device not opened!");
>> + return -EINVAL;
>> + }
>
> What prevents this from racing release of the device?
>
Now there are only read operations for debugfs. The open_count here only needs
to be used to prevent read operations when the device is not opened.
There is no need to deal with competition issues.

>> +
>> + return 0;
>> +}
>> +
>> +static int hisi_acc_vf_debug_io(struct seq_file *seq, void *data)
>> +{
>> + struct device *vf_dev = seq->private;
>> + struct vfio_pci_core_device *core_device = dev_get_drvdata(vf_dev);
>> + struct vfio_device *vdev = &core_device->vdev;
>
> A tab sneaked in here.
>
Thanks.

>> + struct hisi_acc_vf_core_device *hisi_acc_vdev = hisi_acc_get_vf_dev(vdev);
>> + struct hisi_qm *vf_qm = &hisi_acc_vdev->vf_qm;
>> + u64 value;
>> + int ret;
>> +
>> + ret = hisi_acc_vf_debug_check(seq, vdev);
>> + if (ret)
>> + goto io_err;
>> +
>> + ret = qm_wait_dev_not_ready(vf_qm);
>> + if (ret) {
>> + seq_printf(seq, "%s\n", "VF device not ready!");
>> + goto io_err;
>> + }
>> +
>> + value = readl(vf_qm->io_base + QM_MB_CMD_SEND_BASE);
>> + seq_printf(seq, "%s:0x%llx\n", "debug mailbox val", value);
>> +
>> +io_err:
>> + return 0;
>
> A goto that simply returns seems unnecessary vs return at the error
Ok, no need to use goto here. The following one is also handled in the same way.

> condition. Also why don't we return the errno for error cases? Do we> even need seq_printf() calls for error cases?
>

Added logging of seq_printf only on critical steps.

>> +}
>> +
>> +static int hisi_acc_vf_debug_save(struct seq_file *seq, void *data)
>> +{
>> + struct device *vf_dev = seq->private;
>> + struct vfio_pci_core_device *core_device = dev_get_drvdata(vf_dev);
>> + struct vfio_device *vdev = &core_device->vdev;
>
> Another tab.
>
OK.

>> + struct hisi_acc_vf_core_device *hisi_acc_vdev = hisi_acc_get_vf_dev(vdev);
>> + struct hisi_acc_vf_migration_file *migf = hisi_acc_vdev->debug_migf;
>> + int ret;
>> +
>> + ret = hisi_acc_vf_debug_check(seq, vdev);
>> + if (ret)
>> + goto save_err;
>> +
>> + ret = vf_qm_state_save(hisi_acc_vdev, migf);
>> + if (ret) {
>> + seq_printf(seq, "%s\n", "failed to save device data!");
>> + goto save_err;
>> + }
>> + seq_printf(seq, "%s\n", "successful to save device data!");
>> +
>> +save_err:
>> + return 0;
>> +}
>> +
>> +static int hisi_acc_vf_data_read(struct seq_file *seq, void *data)
>> +{
>> + struct device *vf_dev = seq->private;
>> + struct vfio_pci_core_device *core_device = dev_get_drvdata(vf_dev);
>> + struct vfio_device *vdev = &core_device->vdev;
>
> Tab.
>
OK.
>> + struct hisi_acc_vf_core_device *hisi_acc_vdev = hisi_acc_get_vf_dev(vdev);
>> + struct hisi_acc_vf_migration_file *debug_migf = hisi_acc_vdev->debug_migf;
>> + size_t vf_data_sz = offsetofend(struct acc_vf_data, padding);
>> +
>> + if (debug_migf && debug_migf->total_length)
>> + seq_hex_dump(seq, "Mig Data:", DUMP_PREFIX_OFFSET, 16, 1,
>> + (unsigned char *)&debug_migf->vf_data,
>> + vf_data_sz, false);
>> + else
>> + seq_printf(seq, "%s\n", "device not migrated!");
>> +
>> + return 0;
>> +}
>> +
>> +static int hisi_acc_vf_attr_read(struct seq_file *seq, void *data)
>> +{
>> + struct device *vf_dev = seq->private;
>> + struct vfio_pci_core_device *core_device = dev_get_drvdata(vf_dev);
>> + struct vfio_device *vdev = &core_device->vdev;
>
> Tab.
>
OK.
>> + struct hisi_acc_vf_core_device *hisi_acc_vdev = hisi_acc_get_vf_dev(vdev);
>> + struct hisi_acc_vf_migration_file *debug_migf = hisi_acc_vdev->debug_migf;
>> +
>> + if (debug_migf && debug_migf->total_length) {
>> + seq_printf(seq,
>> + "acc device:\n"
>> + "device state: %d\n"
>> + "device ready: %u\n"
>> + "data valid: %d\n"
>> + "data size: %lu\n",
>> + hisi_acc_vdev->mig_state,
>> + hisi_acc_vdev->vf_qm_state,
>> + debug_migf->disabled,
>> + debug_migf->total_length);
>> + } else {
>> + seq_printf(seq, "%s\n", "device not migrated!");
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int hisi_acc_vfio_debug_init(struct hisi_acc_vf_core_device *hisi_acc_vdev)
>> +{
>> + struct vfio_device *vdev = &hisi_acc_vdev->core_device.vdev;
>> + struct dentry *vfio_dev_migration = NULL;
>> + struct dentry *vfio_hisi_acc = NULL;
>> + struct device *dev = vdev->dev;
>> + void *migf = NULL;
>> +
>> + if (!debugfs_initialized())
>> + return 0;
>> +
>> + migf = kzalloc(sizeof(struct hisi_acc_vf_migration_file), GFP_KERNEL);
>> + if (!migf)
>> + return -ENOMEM;
>> + hisi_acc_vdev->debug_migf = migf;
>> +
>> + vfio_dev_migration = debugfs_lookup("migration", vdev->debug_root);
>> + if (!vfio_dev_migration) {
>> + dev_err(dev, "failed to lookup migration debugfs file!\n");
>> + return -ENODEV;
>> + }
>> +
>> + vfio_hisi_acc = debugfs_create_dir("hisi_acc", vfio_dev_migration);
>> + debugfs_create_devm_seqfile(dev, "data", vfio_hisi_acc,
>> + hisi_acc_vf_data_read);
>> + debugfs_create_devm_seqfile(dev, "attr", vfio_hisi_acc,
>> + hisi_acc_vf_attr_read);
>> + debugfs_create_devm_seqfile(dev, "io_test", vfio_hisi_acc,
>> + hisi_acc_vf_debug_io);
>> + debugfs_create_devm_seqfile(dev, "save", vfio_hisi_acc,
>> + hisi_acc_vf_debug_save);
>> +
>> + return 0;
>> +}
>> +
>> +static void hisi_acc_vf_debugfs_exit(struct hisi_acc_vf_core_device *hisi_acc_vdev)
>> +{
>> + if (!debugfs_initialized())
>> + return;
>> +
>> + kfree(hisi_acc_vdev->debug_migf);
>> +}
>> +
>> static int hisi_acc_vfio_pci_open_device(struct vfio_device *core_vdev)
>> {
>> struct hisi_acc_vf_core_device *hisi_acc_vdev = hisi_acc_get_vf_dev(core_vdev);
>> @@ -1323,6 +1498,7 @@ static int hisi_acc_vfio_pci_open_device(struct vfio_device *core_vdev)
>> }
>>
>> vfio_pci_core_finish_enable(vdev);
>> +
>> return 0;
>> }
>>
>> @@ -1420,9 +1596,14 @@ static int hisi_acc_vfio_pci_probe(struct pci_dev *pdev, const struct pci_device
>> ret = vfio_pci_core_register_device(&hisi_acc_vdev->core_device);
>> if (ret)
>> goto out_put_vdev;
>> +
>> + if (ops == &hisi_acc_vfio_pci_migrn_ops)
>> + hisi_acc_vfio_debug_init(hisi_acc_vdev);
>> return 0;
>>
>> out_put_vdev:
>> + if (ops == &hisi_acc_vfio_pci_migrn_ops)
>> + hisi_acc_vf_debugfs_exit(hisi_acc_vdev);
>
> Why do we need this? There's no case where debug_init occurs before
> this goto.
>

Yes. These two lines are not needed here.

>> vfio_put_device(&hisi_acc_vdev->core_device.vdev);
>> return ret;
>> }
>> @@ -1431,6 +1612,7 @@ static void hisi_acc_vfio_pci_remove(struct pci_dev *pdev)
>> {
>> struct hisi_acc_vf_core_device *hisi_acc_vdev = hisi_acc_drvdata(pdev);
>>
>> + hisi_acc_vf_debugfs_exit(hisi_acc_vdev);
>> vfio_pci_core_unregister_device(&hisi_acc_vdev->core_device);
>> vfio_put_device(&hisi_acc_vdev->core_device.vdev);
>> }
>> diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
>> index dcabfeec6ca1..ef50b12f018d 100644
>> --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
>> +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
>> @@ -49,6 +49,14 @@
>> #define QM_EQC_DW0 0X8000
>> #define QM_AEQC_DW0 0X8020
>>
>> +#define VFIO_DEV_DBG_LEN 256
>> +
>> +enum mig_debug_cmd {
>> + STATE_SAVE,
>> + STATE_RESUME,
>> + RW_IO_TEST,
>> +};
>
> Unused.
>
OK.

> Thanks,
> Alex
>
Thanks,
Longfang.
>> +
>> struct acc_vf_data {
>> #define QM_MATCH_SIZE offsetofend(struct acc_vf_data, qm_rsv_state)
>> /* QM match information */
>> @@ -113,5 +121,8 @@ struct hisi_acc_vf_core_device {
>> spinlock_t reset_lock;
>> struct hisi_acc_vf_migration_file *resuming_migf;
>> struct hisi_acc_vf_migration_file *saving_migf;
>> +
>> + /* For debugfs */
>> + struct hisi_acc_vf_migration_file *debug_migf;
>> };
>> #endif /* HISI_ACC_VFIO_PCI_H */
>
> .
>

Next message: Huang, Ying: "Re: [PATCH v2 2/3] mm/memory_hotplug: split memmap_on_memory requests across memblocks"
Previous message: sunran001: "[PATCH] drm/radeon: that open brace { should be on the previous line"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]