[PATCH 8/8] ARM: dts: imx28: drop incorrect reg in fixed regulators
From: Krzysztof Kozlowski
Date: Wed Jul 26 2023 - 03:06:56 EST
Fixed regulators are not in some bus and bindings do not allow a "reg"
property. Move them out of "regulators" node to top-level.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts | 34 +++-----
arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts | 23 ++----
arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts | 23 ++----
arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts | 23 ++----
arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts | 23 ++----
.../dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi | 82 ++++++++-----------
arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi | 19 ++---
arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts | 66 +++++++--------
arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts | 19 ++---
9 files changed, 121 insertions(+), 191 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts b/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts
index 4704b6141836..fd6fee63ad2f 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts
@@ -10,28 +10,20 @@ / {
model = "Armadeus Systems APF28Dev docking/development board";
compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ reg_usb0_vbus: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 23 1>;
+ enable-active-high;
+ };
- reg_usb0_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb0_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 23 1>;
- enable-active-high;
- };
-
- reg_can0_vcc: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "can0_vcc";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
+ reg_can0_vcc: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "can0_vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
};
leds {
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts
index d3e9a731525b..c72fe2d392f1 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts
@@ -64,20 +64,13 @@ mac0: ethernet@800f0000 {
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_usb1_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb_pins_cfa10037>;
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio0 7 1>;
- };
+ reg_usb1_vbus: regulator-0 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_pins_cfa10037>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio0 7 1>;
};
};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts
index c5a7f56d83db..953e3162d2d2 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts
@@ -78,21 +78,14 @@ pca9555: pca9555@20 {
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_usb1_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb_pins_cfa10049>;
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio0 7 1>;
- };
+ reg_usb1_vbus: regulator-0 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_pins_cfa10049>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio0 7 1>;
};
spi-2 {
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts
index 27602c01f162..0be7356941ee 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts
@@ -14,21 +14,14 @@ / {
model = "Crystalfontz CFA-10057 Board";
compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_usb1_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb_pins_cfa10057>;
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio0 7 1>;
- };
+ reg_usb1_vbus: regulator-0 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_pins_cfa10057>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio0 7 1>;
};
backlight {
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts
index 931c4d089b26..aae0f1801461 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts
@@ -14,21 +14,14 @@ / {
model = "Crystalfontz CFA-10058 Board";
compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_usb1_vbus: regulator@0 {
- pinctrl-names = "default";
- pinctrl-0 = <&usb_pins_cfa10058>;
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio0 7 1>;
- };
+ reg_usb1_vbus: regulator-0 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_pins_cfa10058>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio0 7 1>;
};
backlight {
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi
index b285a946e2c2..6633cde305e5 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi
@@ -69,55 +69,45 @@ led1 {
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ reg_3p3v: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- reg_3p3v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_lcd_3v3: regulator-1 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <®_lcd_3v3_pins_mbmx28lc>;
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_lcd_3v3: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <®_lcd_3v3_pins_mbmx28lc>;
- regulator-name = "lcd-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_usb0_vbus: regulator-2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <®_usb0_vbus_pins_mbmx28lc>;
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- reg_usb0_vbus: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <®_usb0_vbus_pins_mbmx28lc>;
- regulator-name = "usb0_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_usb1_vbus: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- pinctrl-names = "default";
- pinctrl-0 = <®_usb1_vbus_pins_mbmx28lc>;
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ reg_usb1_vbus: regulator-3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <®_usb1_vbus_pins_mbmx28lc>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
sound {
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi
index c08b14ad7cd5..66facef10ba9 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi
@@ -14,19 +14,12 @@ memory@40000000 {
reg = <0x40000000 0x08000000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_3p3v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_3p3v: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts b/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts
index 6b01de9efd02..8241c2d159fa 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts
@@ -40,47 +40,37 @@ user2 {
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ reg_3p3v: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- reg_3p3v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_vddio_sd0: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 29 0>;
+ };
- reg_vddio_sd0: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "vddio-sd0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 29 0>;
- };
+ reg_vddio_sd1: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 0>;
+ };
- reg_vddio_sd1: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "vddio-sd1";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 19 0>;
- };
-
- reg_usb1_vbus: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 8 0>;
- enable-active-high;
- };
+ reg_usb1_vbus: regulator-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 8 0>;
+ enable-active-high;
};
};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts b/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts
index 5d74a68c56ff..0f01dded4e3d 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts
@@ -15,19 +15,12 @@ memory@40000000 {
reg = <0x40000000 0x08000000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_usb0_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb0_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 9 0>;
- };
+ reg_usb0_vbus: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 9 0>;
};
leds {
--
2.34.1