[RESEND PATCH v2] rtc: pcf2127: add error checking when disabling POR0

[Hugo Villeneuve]

From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>

If PCF2127 device is absent from the I2C bus, or if there is a
communication problem, disabling POR0 may fail silently and we
still continue with probing the device. In that case, abort probe
operation.

Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
---
V1 -> V2: Removed error message
---
 drivers/rtc/rtc-pcf2127.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index 78141bb06ab0..3387afe93417 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -1192,8 +1192,10 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
 	 * The "Power-On Reset Override" facility prevents the RTC to do a reset
 	 * after power on. For normal operation the PORO must be disabled.
 	 */
-	regmap_clear_bits(pcf2127->regmap, PCF2127_REG_CTRL1,
+	ret = regmap_clear_bits(pcf2127->regmap, PCF2127_REG_CTRL1,
 				PCF2127_BIT_CTRL1_POR_OVRD);
+	if (ret < 0)
+		return ret;
 
 	ret = regmap_read(pcf2127->regmap, pcf2127->cfg->reg_clkout, &val);
 	if (ret < 0)

base-commit: 3c87b351809f220294aec3c0df7b078ff5c5b15b
-- 
2.30.2