[PATCH v3 6/9] media: i2c: ds90ub960: Allow FPD-Link async mode

[Tomi Valkeinen]

Allow using FPD-Link in async mode. The driver handles it correctly, but
the mode was blocked at probe time as there wasn't HW to test this with.
Now the mode has been tested, and it works.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
 drivers/media/i2c/ds90ub960.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
index b840c9160bf2..c29db59e340b 100644
--- a/drivers/media/i2c/ds90ub960.c
+++ b/drivers/media/i2c/ds90ub960.c
@@ -3240,7 +3240,6 @@ ub960_parse_dt_rxport_link_properties(struct ub960_data *priv,
 	switch (rx_mode) {
 	case RXPORT_MODE_RAW12_HF:
 	case RXPORT_MODE_RAW12_LF:
-	case RXPORT_MODE_CSI2_ASYNC:
 		dev_err(dev, "rx%u: unsupported 'ti,rx-mode' %u\n", nport,
 			rx_mode);
 		return -EINVAL;

-- 
2.34.1