Re: [PATCH v2 1/2] gpio: dt-bindings: add parsing of loongson gpio offset

[Yinbo Zhu]

在 2023/7/31 下午11:55, Conor Dooley 写道:
> On Mon, Jul 31, 2023 at 05:10:58PM +0800, Yinbo Zhu wrote:
> > Add parsing GPIO configure, input, output, interrupt register offset
> > address and GPIO control mode support.
>
> This reeks of insufficient use of SoC specific compatibles. Do GPIO
> controllers on the same SoC have different register offsets?


Yes,

> Where are the users for this?


For example, ls2k500 contains multiple GPIO chips with different
(configure, input, output, interrupt) offset addresses, but all others
are the same.

> Cheers,
> Conor.
>
> > Signed-off-by: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
> > ---
> >   .../bindings/gpio/loongson,ls-gpio.yaml       | 37 +++++++++++++++++++
> >   1 file changed, 37 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
> > index fb86e8ce6349..cad67f8bfe6e 100644
> > --- a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
> > +++ b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
> > @@ -29,6 +29,33 @@ properties:
> >   
> >     gpio-ranges: true
> >   
> > +  loongson,gpio-conf-offset:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description:
> > +      This option indicate this GPIO configuration register offset address.
> > +
> > +  loongson,gpio-out-offset:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description:
> > +      This option indicate this GPIO output register offset address.
> > +
> > +  loongson,gpio-in-offset:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description:
> > +      This option indicate this GPIO input register offset address.
> > +
> > +  loongson,gpio-ctrl-mode:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description:
> > +      This option indicate this GPIO control mode, where '0' represents
> > +      bit control mode and '1' represents byte control mode.
> > +
> > +  loongson,gpio-inten-offset:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description:
> > +      This option indicate this GPIO interrupt enable register offset
> > +      address.
> > +
> >     interrupts:
> >       minItems: 1
> >       maxItems: 64
> > @@ -39,6 +66,11 @@ required:
> >     - ngpios
> >     - "#gpio-cells"
> >     - gpio-controller
> > +  - loongson,gpio-conf-offset
> > +  - loongson,gpio-in-offset
> > +  - loongson,gpio-out-offset
> > +  - loongson,gpio-ctrl-mode
> > +  - loongson,gpio-inten-offset
> >     - gpio-ranges
> >     - interrupts
> >   
> > @@ -54,6 +86,11 @@ examples:
> >         ngpios = <64>;
> >         #gpio-cells = <2>;
> >         gpio-controller;
> > +      loongson,gpio-conf-offset = <0>;
> > +      loongson,gpio-in-offset = <0x20>;
> > +      loongson,gpio-out-offset = <0x10>;
> > +      loongson,gpio-ctrl-mode = <0>;
> > +      loongson,gpio-inten-offset = <0x30>;
> >         gpio-ranges = <&pctrl 0 0 15>,
> >                       <&pctrl 16 16 15>,
> >                       <&pctrl 32 32 10>,
> > --
> > 2.20.1