Re: [PATCH v3] net: netsec: Ignore 'phy-mode' on SynQuacer in DT mode

[Andrew Lunn]

On Mon, Jul 31, 2023 at 11:48:32AM +0100, Mark Brown wrote:
> As documented in acd7aaf51b20 ("netsec: ignore 'phy-mode' device
> property on ACPI systems") the SocioNext SynQuacer platform ships with
> firmware defining the PHY mode as RGMII even though the physical
> configuration of the PHY is for TX and RX delays.  Since bbc4d71d63549bc
> ("net: phy: realtek: fix rtl8211e rx/tx delay config") this has caused
> misconfiguration of the PHY, rendering the network unusable.
> 
> This was worked around for ACPI by ignoring the phy-mode property but
> the system is also used with DT.  For DT instead if we're running on a
> SynQuacer force a working PHY mode, as well as the standard EDK2
> firmware with DT there are also some of these systems that use u-boot
> and might not initialise the PHY if not netbooting.  Newer firmware
> imagaes for at least EDK2 are available from Linaro so print a warning
> when doing this.
> 
> Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

    Andrew