Re: [PATCH] drm/bridge: it6505: Check power state with it6505->powered in IRQ handler

[Neil Armstrong]

On 27/07/2023 12:01, Pin-yen Lin wrote:
> On system resume, the driver might call it6505_poweron directly if the
> runtime PM hasn't been enabled. In such case, pm_runtime_get_if_in_use
> will always return 0 because dev->power.runtime_status stays at
> RPM_SUSPENDED, and the IRQ will never be handled.
>
> Use it6505->powered from the driver struct fixes this because it always
> gets updated when it6505_poweron is called.
>
> Fixes: 5eb9a4314053 ("drm/bridge: it6505: Guard bridge power in IRQ handler")
> Signed-off-by: Pin-yen Lin <treapking@xxxxxxxxxxxx>
>
> ---
>
>   drivers/gpu/drm/bridge/ite-it6505.c | 4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
> index 6c2fcd8b8780..2f300f5ca051 100644
> --- a/drivers/gpu/drm/bridge/ite-it6505.c
> +++ b/drivers/gpu/drm/bridge/ite-it6505.c
> @@ -2517,9 +2517,11 @@ static irqreturn_t it6505_int_threaded_handler(int unused, void *data)
>   	};
>   	int int_status[3], i;
>   
> -	if (it6505->enable_drv_hold || pm_runtime_get_if_in_use(dev) <= 0)
> +	if (it6505->enable_drv_hold || !it6505->powered)
>   		return IRQ_HANDLED;
>   
> +	pm_runtime_get_sync(dev);
> +
>   	int_status[0] = it6505_read(it6505, INT_STATUS_01);
>   	int_status[1] = it6505_read(it6505, INT_STATUS_02);
>   	int_status[2] = it6505_read(it6505, INT_STATUS_03);

Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>