[PATCH] arm64: dts: ti: k3: Fixup remaining pin group node names for make dtbs checks
From: Nishanth Menon
Date: Wed Aug 02 2023 - 00:04:13 EST
Fix up outstanding pingroup node names to be compliant with the
upcoming pinctrl-single schema.
Signed-off-by: Nishanth Menon <nm@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 2 +-
arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 2 +-
arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts | 4 ++--
arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 4 ++--
5 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index 7c1402b0fa2d..e07ddff22e07 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -432,7 +432,7 @@ AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */
>;
};
- gbe_pmx_obsclk: gbe-pmx-clk-default {
+ gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins {
pinctrl-single,pins = <
AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
index e73458ca6900..e9419c4fe605 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
@@ -10,7 +10,7 @@
*/
&main_pmx0 {
- cp2102n_reset_pin_default: cp2102n-reset-pin-default {
+ cp2102n_reset_pin_default: cp2102n-reset-default-pins {
pinctrl-single,pins = <
/* (AF12) GPIO1_24, used as cp2102 reset */
AM65X_IOPAD(0x01e0, PIN_OUTPUT, 7)
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 973a89b04a22..734b051c9700 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -192,7 +192,7 @@ AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
>;
};
- wkup_pca554_default: wkup-pca554-default {
+ wkup_pca554_default: wkup-pca554-default-pins {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
>;
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
index cbe44634914f..774eb14ac907 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
@@ -33,7 +33,7 @@ AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */
>;
};
- main_bkey_pcie_reset: main-bkey-pcie-reset {
+ main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7) /* (AG13) GPIO1_15 */
>;
@@ -46,7 +46,7 @@ AM65X_IOPAD(0x01cc, PIN_INPUT_PULLUP, 7) /* (AD13) GPIO1_19 */
>;
};
- main_m2_pcie_mux_control: main-m2-pcie-mux-control {
+ main_m2_pcie_mux_control: main-m2-pcie-mux-control-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0148, PIN_INPUT_PULLUP, 7) /* (AG22) GPIO0_82 */
AM65X_IOPAD(0x0160, PIN_INPUT_PULLUP, 7) /* (AE20) GPIO0_88 */
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 21ad49cfa7ee..a8172ba55f4b 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -273,7 +273,7 @@ J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */
>;
};
- mcu_rpi_header_gpio0_pins0_default: mcu-rpi-header-gpio0-pins0-default {
+ mcu_rpi_header_gpio0_pins0_default: mcu-rpi-header-gpio0-default-pins-0 {
pinctrl-single,pins = <
J721S2_WKUP_IOPAD(0x118, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_66 */
J721S2_WKUP_IOPAD(0x05C, PIN_INPUT, 7) /* (E24) MCU_SPI1_D0.WKUP_GPIO0_1 */
@@ -289,7 +289,7 @@ J721S2_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (C27) MCU_SPI1_CS0.WKUP_GPIO0_3 */
};
&wkup_pmx3 {
- mcu_rpi_header_gpio0_pins1_default: mcu-rpi-header-gpio0-pins1-default {
+ mcu_rpi_header_gpio0_pins1_default: mcu-rpi-header-gpio0-default-pins-1 {
pinctrl-single,pins = <
J721S2_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (K26) WKUP_GPIO0_49 */
>;
--
2.40.0