Re: [PATCH] ARM: dts: at91: ksz9477_evb: Add tx-internal-delay-ps property for port5

[claudiu beznea]

On 27.07.2023 11:06, Lukasz Majewski wrote:
> Without this change the KSZ9477 Evaluation board's Linux (v6.5-rc1) shows
> following device warning:
> 
> 'ksz-switch spi1.0: Port 5 interpreting RGMII delay settings based on "phy-mode" property, please update device tree to specify "rx-internal-delay-ps" and "tx-internal-delay-ps"'
> 
> This is not critical, as KSZ driver by itself assigns default value of
> tx delay to 2000 ps (as 'rgmii-txid' is set as PHY mode).
> 
> However, to avoid extra warnings in logs - the missing 'tx-internal-delay-ps'
> has been specified with the default value of 2000 ps.
> 
> Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>

Applied to at91-dt, thanks!