[PATCH v2 0/2] arm64: dts: ti: k3-am62: Add MCU MCAN

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>

On AM62x there are no hardware interrupts routed to A53 GIC
interrupt controller for MCU MCAN IPs, so MCU MCAN nodes were
omitted from MCU dtsi.

Timer polling was introduced in commits [1][2] so now add MCU MCAN nodes
to the MCU dtsi for Cortex A53.

[1] commit b382380c0d2d ("can: m_can: Add hrtimer to generate software interrupt")
[2] commit bb410c03b999 ("dt-bindings: net: can: Remove interrupt properties for MCAN")

Once the MCU MCANs are added to the SOC dtsi, enable the Verdin CAN2.

v1..v2:
 - fixed can node name
 - added commit prefix before sha in commit message

Hiago De Franco (1):
  arm64: dts: ti: k3-am625-verdin: enable CAN_2

Judith Mendez (1):
  arm64: dts: ti: k3-am62: Add MCU MCAN nodes

 arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi       | 24 +++++++++++++++++++
 .../boot/dts/ti/k3-am62-verdin-dahlia.dtsi    |  5 ++++
 .../arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi |  5 ++++
 .../boot/dts/ti/k3-am62-verdin-yavia.dtsi     |  5 ++++
 arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi    | 19 +++++++++++++--
 5 files changed, 56 insertions(+), 2 deletions(-)

-- 
2.25.1