[PATCH v5 01/11] dt-bindings: remoteproc: qcom: Add support for multipd model

From: Manikanta Mylavarapu
Date: Wed Aug 02 2023 - 10:06:55 EST

Add new binding document for multipd model remoteproc.
IPQ5332, IPQ9574 follows multipd model.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
Changes in v5:
- No changes.

Changes in v4:
- No changes.

Changes in v3:
- Pick up R-b tag

Changes in v2:
- Fixed all comments and rebased on linux-next.
- Changed to BSD-3-Clause
- Added firmware-name.

.../bindings/remoteproc/qcom,multipd-pil.yaml | 189 ++++++++++++++++++
1 file changed, 189 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
new file mode 100644
index 000000000000..c52ac1640d7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
@@ -0,0 +1,189 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,multipd-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Multipd Secure Peripheral Image Loader
+
+maintainers:
+ - Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
+
+description:
+ Multipd Peripheral Image Loader loads firmware and boots Q6 protection domain,
+ WCSS protection domain remoteproc's on the Qualcomm IPQ9574, IPQ5332 SoC.
+ Protection domain is similar to process in Linux. Here QDSP6 processor runs
+ each wifi radio functionality on a separate process. One process can't access
+ other process resources, so this is termed as PD i.e protection domain.
+
+properties:
+ compatible:
+ enum:
+ - qcom,ipq5332-q6-mpd
+ - qcom,ipq9574-q6-mpd
+
+ reg:
+ maxItems: 1
+
+ firmware-name:
+ maxItems: 2
+
+ interrupts:
+ items:
+ - description: Watchdog interrupt
+ - description: Fatal interrupt
+ - description: Ready interrupt
+ - description: Handover interrupt
+ - description: Stop acknowledge interrupt
+
+ interrupt-names:
+ items:
+ - const: wdog
+ - const: fatal
+ - const: ready
+ - const: handover
+ - const: stop-ack
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: States used by the AP to signal the remote processor
+ items:
+ - description: Shutdown Q6
+ - description: Stop Q6
+
+ qcom,smem-state-names:
+ description:
+ Names of the states used by the AP to signal the remote processor
+ items:
+ - const: shutdown
+ - const: stop
+
+ memory-region:
+ items:
+ - description: Q6 reserved region
+
+ glink-edge:
+ $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
+ description:
+ Qualcomm G-Link subnode which represents communication edge, channels
+ and devices related to the Modem.
+ unevaluatedProperties: false
+
+patternProperties:
+ "^pd-1|pd-2|pd-3":
+ type: object
+ description:
+ WCSS means 'wireless connectivity sub system', in simple words it's a
+ wifi radio block. In multipd model, Q6 root protection domain will
+ provide services to WCSS user protection domain. In other words WCSS
+ protection domains depends on Q6 protection domain i.e Q6 should be up
+ before WCSS, similarly Q6 should shut down after all WCSS domains are
+ down. It can be achieved by building parent-child topology between Q6
+ and WCSS domain's i.e keeping wcss node as sub node of Q6 device node.
+
+ properties:
+ firmware-name:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: Fatal interrupt
+ - description: Ready interrupt
+ - description: Spawn acknowledge interrupt
+ - description: Stop acknowledge interrupt
+
+ interrupt-names:
+ items:
+ - const: fatal
+ - const: ready
+ - const: spawn-ack
+ - const: stop-ack
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: States used by the AP to signal the remote processor
+ items:
+ - description: Shutdown WCSS pd
+ - description: Stop WCSS pd
+ - description: Spawn WCSS pd
+
+ qcom,smem-state-names:
+ description:
+ Names of the states used by the AP to signal the remote processor
+ items:
+ - const: shutdown
+ - const: stop
+ - const: spawn
+
+ required:
+ - firmware-name
+ - interrupts
+ - interrupt-names
+ - qcom,smem-states
+ - qcom,smem-state-names
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - firmware-name
+ - reg
+ - interrupts
+ - interrupt-names
+ - qcom,smem-states
+ - qcom,smem-state-names
+ - memory-region
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ q6v5_wcss: remoteproc@d100000 {
+ compatible = "qcom,ipq5332-q6-mpd";
+ reg = <0xd100000 0x4040>;
+ firmware-name = "ath11k/IPQ5332/hw1.0/q6_fw0.mdt",
+ "ath11k/IPQ5332/hw1.0/iu_fw.mdt";
+ interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 0 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 1 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 2 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 3 IRQ_TYPE_NONE>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ qcom,smem-states = <&wcss_smp2p_out 0>,
+ <&wcss_smp2p_out 1>;
+ qcom,smem-state-names = "shutdown",
+ "stop";
+
+ memory-region = <&q6_region>;
+
+ glink-edge {
+ interrupts = <GIC_SPI 417 IRQ_TYPE_EDGE_RISING>;
+ label = "rtr";
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 8>;
+ };
+
+ pd-1 {
+ firmware-name = "ath11k/IPQ5332/hw1.0/q6_fw1.mdt";
+ interrupts-extended = <&wcss_smp2p_in 8 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 9 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 12 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 11 IRQ_TYPE_NONE>;
+ interrupt-names = "fatal",
+ "ready",
+ "spawn-ack",
+ "stop-ack";
+ qcom,smem-states = <&wcss_smp2p_out 8>,
+ <&wcss_smp2p_out 9>,
+ <&wcss_smp2p_out 10>;
+ qcom,smem-state-names = "shutdown",
+ "stop",
+ "spawn";
+ };
+ };
--
2.34.1