Re: [PATCH v3 12/12] x86/virt/tdx: Adjust 'struct tdx_module_args' to use x86 "register index" layout

[Isaku Yamahata]

On Wed, Jul 26, 2023 at 11:25:14PM +1200,
Kai Huang <kai.huang@xxxxxxxxx> wrote:

> For TDX guest, KVM needs to call __seamcall_saved_ret() to make the
> TDH.VP.ENTER SEAMCALL to enter the guest, possibly taking all registers
> in 'struct tdx_module_args' as input/output.
> 
> KVM caches guest's GPRs in 'kvm_vcpu_arch::regs[]', which follows the
> "register index" hardware layout of x86 GPRs.  On the other hand, the
> __seamcall_saved_ret() takes the pointer of 'struct tdx_module_args' as
> argument, thus there's a mismatch.
> 
> KVM could choose to copy input registers from 'vcpu::regs[]' to a
> 'struct tdx_module_args' and use that as argument to make the SEAMCALL,
> but such memory copy isn't desired and should be avoided if possible.
> 
> It's not feasible to change KVM's 'vcpu::regs[]' layout due to various
> reasons (e.g., emulation code uses decoded register index as array index
> to access the register).  Therefore, adjust 'struct tdx_module_args' to
> match KVM's 'vcpu::regs[]' layout so that KVM can simply do below:
> 
> 	__seamcall_saved_ret(TDH_VP_ENTER,
> 			(struct tdx_module_args *)vcpu->arch.regs);
> 
> Note RAX/RSP/RBP are not used by the TDX_MODULE_CALL assembly, but they
> are necessary in order match the layout of 'struct tdx_module_args' to
> KVM's 'vcpu::regs[]'.  Thus add them to the structure, but name them as
> *_unused.  Also don't include them to asm-offset.c so that any misuse of
> them in the assembly would result in build error.
> 
> Cc: Kirill A. Shutemov <kirill.shutemov@xxxxxxxxxxxxxxx>
> Cc: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
> Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
> Cc: Sean Christopherson <seanjc@xxxxxxxxxx>
> Cc: Paolo Bonzini <pbonzini@xxxxxxxxxx>
> Cc: Isaku Yamahata <isaku.yamahata@xxxxxxxxx>
> Suggested-by: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
> Signed-off-by: Kai Huang <kai.huang@xxxxxxxxx>
> ---
> 
> v2 -> v3:
>  - New patch
> 
> ---
>  arch/x86/include/asm/shared/tdx.h | 19 +++++++++++++------
>  arch/x86/kernel/asm-offsets.c     |  6 +++---
>  2 files changed, 16 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/x86/include/asm/shared/tdx.h b/arch/x86/include/asm/shared/tdx.h
> index 74fc466dfdcd..8d1427562c63 100644
> --- a/arch/x86/include/asm/shared/tdx.h
> +++ b/arch/x86/include/asm/shared/tdx.h
> @@ -58,24 +58,31 @@
>   * Used in __tdcall*() to gather the input/output registers' values of the
>   * TDCALL instruction when requesting services from the TDX module. This is a
>   * software only structure and not part of the TDX module/VMM ABI
> + *
> + * Note those *_unused are not used by the TDX_MODULE_CALL assembly.
> + * The layout of this structure also matches KVM's kvm_vcpu_arch::regs[]
> + * layout, which follows the "register index" order of x86 GPRs.  KVM
> + * then can simply type cast kvm_vcpu_arch::regs[] to this structure to
> + * avoid the extra memory copy between two structures when making
> + * TDH.VP.ENTER SEAMCALL.
>   */
>  struct tdx_module_args {
> -	/* callee-clobbered */
> +	u64 rax_unused;
>  	u64 rcx;
>  	u64 rdx;
> +	u64 rbx;
> +	u64 rsp_unused;
> +	u64 rbp_unused;
> +	u64 rsi;
> +	u64 rdi;
>  	u64 r8;
>  	u64 r9;
> -	/* extra callee-clobbered */
>  	u64 r10;
>  	u64 r11;
> -	/* callee-saved + rdi/rsi */
>  	u64 r12;
>  	u64 r13;
>  	u64 r14;
>  	u64 r15;
> -	u64 rbx;
> -	u64 rdi;
> -	u64 rsi;
>  };
>  
>  /* Used to communicate with the TDX module */
> diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
> index 6913b372ccf7..e4ad822d3acd 100644
> --- a/arch/x86/kernel/asm-offsets.c
> +++ b/arch/x86/kernel/asm-offsets.c
> @@ -70,6 +70,9 @@ static void __used common(void)
>  	BLANK();
>  	OFFSET(TDX_MODULE_rcx, tdx_module_args, rcx);
>  	OFFSET(TDX_MODULE_rdx, tdx_module_args, rdx);
> +	OFFSET(TDX_MODULE_rbx, tdx_module_args, rbx);
> +	OFFSET(TDX_MODULE_rsi, tdx_module_args, rsi);
> +	OFFSET(TDX_MODULE_rdi, tdx_module_args, rdi);
>  	OFFSET(TDX_MODULE_r8,  tdx_module_args, r8);
>  	OFFSET(TDX_MODULE_r9,  tdx_module_args, r9);
>  	OFFSET(TDX_MODULE_r10, tdx_module_args, r10);
> @@ -78,9 +81,6 @@ static void __used common(void)
>  	OFFSET(TDX_MODULE_r13, tdx_module_args, r13);
>  	OFFSET(TDX_MODULE_r14, tdx_module_args, r14);
>  	OFFSET(TDX_MODULE_r15, tdx_module_args, r15);
> -	OFFSET(TDX_MODULE_rbx, tdx_module_args, rbx);
> -	OFFSET(TDX_MODULE_rdi, tdx_module_args, rdi);
> -	OFFSET(TDX_MODULE_rsi, tdx_module_args, rsi);
>  
>  	BLANK();
>  	OFFSET(BP_scratch, boot_params, scratch);
> -- 
> 2.41.0

I replaced the current TDX KVM TDH.VP.ENTER with this function and it worked.

Test-by: Isaku Yamahata <isaku.yamahata@xxxxxxxxx>
-- 
Isaku Yamahata <isaku.yamahata@xxxxxxxxx>