[PATCH 02/11] drm/bridge: tc358768: Fix bit updates

[Tomi Valkeinen]

The driver has a few places where it does:

if (thing_is_enabled_in_config)
	update_thing_bit_in_hw()

This means that if the thing is _not_ enabled, the bit never gets
cleared. This affects the h/vsyncs and continuous DSI clock bits.

Fix the driver to always update the bit.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/bridge/tc358768.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358768.c b/drivers/gpu/drm/bridge/tc358768.c
index bc97a837955b..b668f77673c3 100644
--- a/drivers/gpu/drm/bridge/tc358768.c
+++ b/drivers/gpu/drm/bridge/tc358768.c
@@ -794,8 +794,8 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
 		val |= BIT(i + 1);
 	tc358768_write(priv, TC358768_HSTXVREGEN, val);
 
-	if (!(mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS))
-		tc358768_write(priv, TC358768_TXOPTIONCNTRL, 0x1);
+	tc358768_write(priv, TC358768_TXOPTIONCNTRL,
+		       (mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) ? 0 : BIT(0));
 
 	/* TXTAGOCNT[26:16] RXTASURECNT[10:0] */
 	val = tc358768_to_ns((lptxcnt + 1) * dsibclk_nsk * 4);
@@ -861,11 +861,12 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
 	tc358768_write(priv, TC358768_DSI_HACT, hact);
 
 	/* VSYNC polarity */
-	if (!(mode->flags & DRM_MODE_FLAG_NVSYNC))
-		tc358768_update_bits(priv, TC358768_CONFCTL, BIT(5), BIT(5));
+	tc358768_update_bits(priv, TC358768_CONFCTL, BIT(5),
+			     (mode->flags & DRM_MODE_FLAG_PVSYNC) ? BIT(5) : 0);
+
 	/* HSYNC polarity */
-	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
-		tc358768_update_bits(priv, TC358768_PP_MISC, BIT(0), BIT(0));
+	tc358768_update_bits(priv, TC358768_PP_MISC, BIT(0),
+			     (mode->flags & DRM_MODE_FLAG_PHSYNC) ? BIT(0) : 0);
 
 	/* Start DSI Tx */
 	tc358768_write(priv, TC358768_DSI_START, 0x1);

-- 
2.34.1