[PATCH] arm64: dts: qcom: msm8998: Add DPU1 nodes

[Konrad Dybcio]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>

Add the required nodes to support the display hardware on msm8998.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
[konrad: update the commit msg and AGdR's email, rebase]
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 283 +++++++++++++++++++++++++++++++++-
 1 file changed, 279 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index a41a34dbcc3c..e28c5bbc99e5 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -316,6 +316,25 @@ scm {
 		};
 	};
 
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-131250000 {
+			opp-hz = /bits/ 64 <131250000>;
+			required-opps = <&rpmpd_opp_low_svs>;
+		};
+
+		opp-210000000 {
+			opp-hz = /bits/ 64 <210000000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-312500000 {
+			opp-hz = /bits/ 64 <312500000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -2727,15 +2746,271 @@ mmcc: clock-controller@c8c0000 {
 				      "dpvco";
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&gcc GCC_MMSS_GPLL0_CLK>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi1_phy 0>,
 				 <0>,
 				 <0>,
 				 <0>;
 		};
 
+		mdss: display-subsystem@c900000 {
+			compatible = "qcom,msm8998-mdss";
+			reg = <0x0c900000 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+			iommus = <&mmss_smmu 0>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@c901000 {
+				compatible = "qcom,msm8998-dpu";
+				reg = <0x0c901000 0x8f000>,
+				      <0x0c9a8e00 0xf0>,
+				      <0x0c9b0000 0x2008>,
+				      <0x0c9b8000 0x1040>;
+				reg-names = "mdp",
+					    "regdma",
+					    "vbif",
+					    "vbif_nrt";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MNOC_AHB_CLK>,
+					 <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "mnoc",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&mmcc MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd MSM8998_VDDMX>;
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-171430000 {
+						opp-hz = /bits/ 64 <171430000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-275000000 {
+						opp-hz = /bits/ 64 <275000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-330000000 {
+						opp-hz = /bits/ 64 <330000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+
+					opp-412500000 {
+						opp-hz = /bits/ 64 <412500000>;
+						required-opps = <&rpmpd_opp_turbo>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@c994000 {
+				compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0c994000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&mmcc MDSS_BYTE0_CLK>,
+					 <&mmcc MDSS_BYTE0_INTF_CLK>,
+					 <&mmcc MDSS_PCLK0_CLK>,
+					 <&mmcc MDSS_ESC0_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+						  <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd MSM8998_VDDCX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@c994400 {
+				compatible = "qcom,dsi-phy-10nm-8998";
+				reg = <0x0c994400 0x200>,
+				      <0x0c994600 0x280>,
+				      <0x0c994a00 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@c996000 {
+				compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0c996000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&mmcc MDSS_BYTE1_CLK>,
+					 <&mmcc MDSS_BYTE1_INTF_CLK>,
+					 <&mmcc MDSS_PCLK1_CLK>,
+					 <&mmcc MDSS_ESC1_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
+						  <&mmcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd MSM8998_VDDCX>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@c996400 {
+				compatible = "qcom,dsi-phy-10nm-8998";
+				reg = <0x0c996400 0x200>,
+				      <0x0c996600 0x280>,
+				      <0x0c996a00 0x10e>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
 		mmss_smmu: iommu@cd00000 {
 			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
 			reg = <0x0cd00000 0x40000>;

---
base-commit: bdffb18b5dd8071cd25685b966f380a30b1fadaa
change-id: 20230805-topic-8998_dpu-1fd83d24ea9c

Best regards,
-- 
Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>