Re: [PATCH 2/5] dma: add dma mask interface in probe

[Baolin Wang]

On 8/7/2023 1:20 PM, Kaiwei Liu wrote:
> In the probe of DMA, the default addressing range is 32 bits,
> while the actual DMA hardware addressing range used is 36 bits.
> So add dma_set_mask_and_coherent function to match DMA
> addressing range.
>
> Signed-off-by: Kaiwei Liu <kaiwei.liu@xxxxxxxxxx>
> ---
>   drivers/dma/sprd-dma.c | 9 +++++++++
>   1 file changed, 9 insertions(+)
>
> diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
> index 20c3cb1ef2f5..0e146550dfbb 100644
> --- a/drivers/dma/sprd-dma.c
> +++ b/drivers/dma/sprd-dma.c
> @@ -1115,6 +1115,15 @@ static int sprd_dma_probe(struct platform_device *pdev)
>   	u32 chn_count;
>   	int ret, i;
>   
> +	ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(36));
> +	if (ret) {
> +		ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> +		if (ret) {
> +			dev_err(&pdev->dev, "dma_set_mask_and_coherent failed\n");

The error message is not readable, may be something like below?
"unable to set coherent mask to 32\n"

The changes look good to me. Chunyan and Orson, please double check the 
DMA mask?

> +			return ret;
> +		}
> +	}
> +
>   	/* Parse new and deprecated dma-channels properties */
>   	ret = device_property_read_u32(&pdev->dev, "dma-channels", &chn_count);
>   	if (ret)