[PATCH v4 0/6] arm64: ti: k3-am62: Add display support

[Aradhya Bhatia]

Hi all,

The patch series adds DT nodes for Display SubSystem (DSS) and other
peripherals required to enable the HDMI audio and video on the AM625 SK,
AM62-LP SK, as well as the AM625 based Beagle-Play platforms. An HDMI
monitor can be connected to the boards for the audio/video outputs.

The series adding the compatible and basic driver support[0] is in the
drm-misc-next and linux-next queues and is expected to be in the
mainline by v6.6-rc1. Patch 5/6 also requires Nishanth Menon's patch[1]
that introduces debounce select mux macros. This patch too is not in
v6.5-rc1 but has been picked up in ti-next[2] and hence, is present in
linux-next.

Patches 4 and 5 have been picked up from TI's vendor tree[3] based off
linux-kernel v6.1.

Regards
Aradhya

Change Log:
V3 -> V4:
  - Added "Fixes" tag for patch 1/6.
  - Rebased to linux-next.
  - Enabled display at board level and disabled at SoC level.
  - Dropped OLDI pinmux configuration as OLDI output comes directly from
    the SoC and muxing is not required.
  - Squashed DSS pinmux patches into their platform specific HDMI
    support patches, because it did not make sense to have only one set
    of pinmux config separated in a patch.

V2 -> V3:
  - Updated the compatible from "ti,am65x-dss" to "ti,am625-dss".
  - Peripheral nodes like HDMI TX, HDMI connector are now added to
    k3-am62x-sk-common.dtsi instead of k3-am625-sk.dts, in order to
    support AM62-LP SK-EVM as well.
  - Dropped the HDMI master clock node as it is not connected on the
    EVM, and should not have been added in the first place.
  - Re-worded and Re-ordered commits.
  - Dropped Rahul Ravikumar's R-bs because of the changes.
  - Added AM625 based Beagle-Play for HDMI support.
  - Added HDMI audio support as well.

V1 -> V2:
 - Removed repetitive data in dss_ports

V3: https://lore.kernel.org/all/20230728173438.12995-1-a-bhatia1@xxxxxx/
V2: https://lore.kernel.org/all/20220505134303.23208-1-a-bhatia1@xxxxxx/
V1: https://lore.kernel.org/all/20220427090850.32280-1-a-bhatia1@xxxxxx/

[0]: https://lore.kernel.org/all/20230616150900.6617-1-a-bhatia1@xxxxxx/
[1]: https://lore.kernel.org/all/20230619131620.3286650-1-nm@xxxxxx/
[2]: https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git/commit/?id=0bec3d7ecc7493b0e530f6f34539841ef6779006
[3]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/log/?h=ti-linux-6.1.y-cicd

Aradhya Bhatia (4):
  arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency
  arm64: dts: ti: k3-am62-main: Add node for DSS
  arm64: dts: ti: k3-am62x-sk-common: Add HDMI support
  arm64: defconfig: Enable ITE_IT66121 HDMI transmitter

Jai Luthra (1):
  arm64: dts: ti: am62x-sk: Add overlay for HDMI audio

Nishanth Menon (1):
  arm64: dts: ti: k3-am625-beagleplay: Add HDMI support

 arch/arm64/boot/dts/ti/Makefile               |   3 +
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi      |  25 +++
 .../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 158 ++++++++++++++++++
 .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi |  95 ++++++++++-
 .../boot/dts/ti/k3-am62x-sk-hdmi-audio.dtso   |  40 +++++
 arch/arm64/configs/defconfig                  |   1 +
 6 files changed, 321 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62x-sk-hdmi-audio.dtso


base-commit: f7dc24b3413851109c4047b22997bd0d95ed52a2
-- 
2.40.1