Re: [PATCH 5/9] arm64: dts: qcom: sa8775p-ride: move the reset-gpios property of the PHY

[Andrew Lunn]

> > I have proposed a solution for this problem in 2020 but it never got
> > upstream. Now we have a workaround in place which allows us to hard-code
> > the PHY id in the compatible property, thus skipping the ID scanning).
> 
> nitpicky, but I think that already existed at that time :D

Yes, it has been there are long long time. It is however only in the
last 5 years of so has it been seen as a solution to the chicken egg
problem.

> >  		sgmii_phy: phy@8 {
> > +			compatible = "ethernet-phy-id0141.0dd4";
> >  			reg = <0x8>;
> >  			device_type = "ethernet-phy";
> > +			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
> > +			reset-deassert-us = <70000>;
> 
> Doesn't this need reset-assert-us?

If i remember correctly, there is a default value if DT does not
provide one.

	Andrew