Re: [RFC PATCH v1 05/21] arm64: PCI: Migrate ACPI related functions to pci-acpi.c

From: Bjorn Helgaas
Date: Mon Aug 07 2023 - 18:42:02 EST


On Thu, Aug 03, 2023 at 11:29:00PM +0530, Sunil V L wrote:
> The functions defined in arm64 for ACPI support are required
> for RISC-V also. To avoid duplication, copy these functions
> to common location.

I assume this is a "move" (not a copy) and the code being moved isn't
being changed.

If so,

Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>

> Signed-off-by: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
> ---
> arch/arm64/kernel/pci.c | 193 ----------------------------------------
> drivers/pci/pci-acpi.c | 182 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 182 insertions(+), 193 deletions(-)
>
> diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
> index 2276689b5411..fd9a7bed83ce 100644
> --- a/arch/arm64/kernel/pci.c
> +++ b/arch/arm64/kernel/pci.c
> @@ -6,30 +6,7 @@
> * Copyright (C) 2014 ARM Ltd.
> */
>
> -#include <linux/acpi.h>
> -#include <linux/init.h>
> -#include <linux/io.h>
> -#include <linux/kernel.h>
> -#include <linux/mm.h>
> -#include <linux/of_pci.h>
> -#include <linux/of_platform.h>
> #include <linux/pci.h>
> -#include <linux/pci-acpi.h>
> -#include <linux/pci-ecam.h>
> -#include <linux/slab.h>
> -
> -#ifdef CONFIG_ACPI
> -/*
> - * Try to assign the IRQ number when probing a new device
> - */
> -int pcibios_alloc_irq(struct pci_dev *dev)
> -{
> - if (!acpi_disabled)
> - acpi_pci_irq_enable(dev);
> -
> - return 0;
> -}
> -#endif
>
> /*
> * raw_pci_read/write - Platform-specific PCI config space access.
> @@ -63,173 +40,3 @@ int pcibus_to_node(struct pci_bus *bus)
> EXPORT_SYMBOL(pcibus_to_node);
>
> #endif
> -
> -#ifdef CONFIG_ACPI
> -
> -struct acpi_pci_generic_root_info {
> - struct acpi_pci_root_info common;
> - struct pci_config_window *cfg; /* config space mapping */
> -};
> -
> -int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
> -{
> - struct pci_config_window *cfg = bus->sysdata;
> - struct acpi_device *adev = to_acpi_device(cfg->parent);
> - struct acpi_pci_root *root = acpi_driver_data(adev);
> -
> - return root->segment;
> -}
> -
> -int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
> -{
> - struct pci_config_window *cfg;
> - struct acpi_device *adev;
> - struct device *bus_dev;
> -
> - if (acpi_disabled)
> - return 0;
> -
> - cfg = bridge->bus->sysdata;
> -
> - /*
> - * On Hyper-V there is no corresponding ACPI device for a root bridge,
> - * therefore ->parent is set as NULL by the driver. And set 'adev' as
> - * NULL in this case because there is no proper ACPI device.
> - */
> - if (!cfg->parent)
> - adev = NULL;
> - else
> - adev = to_acpi_device(cfg->parent);
> -
> - bus_dev = &bridge->bus->dev;
> -
> - ACPI_COMPANION_SET(&bridge->dev, adev);
> - set_dev_node(bus_dev, acpi_get_node(acpi_device_handle(adev)));
> -
> - return 0;
> -}
> -
> -static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
> -{
> - struct resource_entry *entry, *tmp;
> - int status;
> -
> - status = acpi_pci_probe_root_resources(ci);
> - resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
> - if (!(entry->res->flags & IORESOURCE_WINDOW))
> - resource_list_destroy_entry(entry);
> - }
> - return status;
> -}
> -
> -/*
> - * Lookup the bus range for the domain in MCFG, and set up config space
> - * mapping.
> - */
> -static struct pci_config_window *
> -pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
> -{
> - struct device *dev = &root->device->dev;
> - struct resource *bus_res = &root->secondary;
> - u16 seg = root->segment;
> - const struct pci_ecam_ops *ecam_ops;
> - struct resource cfgres;
> - struct acpi_device *adev;
> - struct pci_config_window *cfg;
> - int ret;
> -
> - ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops);
> - if (ret) {
> - dev_err(dev, "%04x:%pR ECAM region not found\n", seg, bus_res);
> - return NULL;
> - }
> -
> - adev = acpi_resource_consumer(&cfgres);
> - if (adev)
> - dev_info(dev, "ECAM area %pR reserved by %s\n", &cfgres,
> - dev_name(&adev->dev));
> - else
> - dev_warn(dev, FW_BUG "ECAM area %pR not reserved in ACPI namespace\n",
> - &cfgres);
> -
> - cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
> - if (IS_ERR(cfg)) {
> - dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
> - PTR_ERR(cfg));
> - return NULL;
> - }
> -
> - return cfg;
> -}
> -
> -/* release_info: free resources allocated by init_info */
> -static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
> -{
> - struct acpi_pci_generic_root_info *ri;
> -
> - ri = container_of(ci, struct acpi_pci_generic_root_info, common);
> - pci_ecam_free(ri->cfg);
> - kfree(ci->ops);
> - kfree(ri);
> -}
> -
> -/* Interface called from ACPI code to setup PCI host controller */
> -struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
> -{
> - struct acpi_pci_generic_root_info *ri;
> - struct pci_bus *bus, *child;
> - struct acpi_pci_root_ops *root_ops;
> - struct pci_host_bridge *host;
> -
> - ri = kzalloc(sizeof(*ri), GFP_KERNEL);
> - if (!ri)
> - return NULL;
> -
> - root_ops = kzalloc(sizeof(*root_ops), GFP_KERNEL);
> - if (!root_ops) {
> - kfree(ri);
> - return NULL;
> - }
> -
> - ri->cfg = pci_acpi_setup_ecam_mapping(root);
> - if (!ri->cfg) {
> - kfree(ri);
> - kfree(root_ops);
> - return NULL;
> - }
> -
> - root_ops->release_info = pci_acpi_generic_release_info;
> - root_ops->prepare_resources = pci_acpi_root_prepare_resources;
> - root_ops->pci_ops = (struct pci_ops *)&ri->cfg->ops->pci_ops;
> - bus = acpi_pci_root_create(root, root_ops, &ri->common, ri->cfg);
> - if (!bus)
> - return NULL;
> -
> - /* If we must preserve the resource configuration, claim now */
> - host = pci_find_host_bridge(bus);
> - if (host->preserve_config)
> - pci_bus_claim_resources(bus);
> -
> - /*
> - * Assign whatever was left unassigned. If we didn't claim above,
> - * this will reassign everything.
> - */
> - pci_assign_unassigned_root_bus_resources(bus);
> -
> - list_for_each_entry(child, &bus->children, node)
> - pcie_bus_configure_settings(child);
> -
> - return bus;
> -}
> -
> -void pcibios_add_bus(struct pci_bus *bus)
> -{
> - acpi_pci_add_bus(bus);
> -}
> -
> -void pcibios_remove_bus(struct pci_bus *bus)
> -{
> - acpi_pci_remove_bus(bus);
> -}
> -
> -#endif
> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> index a05350a4e49c..d6b2d64b8237 100644
> --- a/drivers/pci/pci-acpi.c
> +++ b/drivers/pci/pci-acpi.c
> @@ -15,6 +15,7 @@
> #include <linux/pci_hotplug.h>
> #include <linux/module.h>
> #include <linux/pci-acpi.h>
> +#include <linux/pci-ecam.h>
> #include <linux/pm_runtime.h>
> #include <linux/pm_qos.h>
> #include <linux/rwsem.h>
> @@ -1517,4 +1518,185 @@ static int __init acpi_pci_init(void)
>
> return 0;
> }
> +
> arch_initcall(acpi_pci_init);
> +
> +#if defined(CONFIG_ARM64)
> +/*
> + * Try to assign the IRQ number when probing a new device
> + */
> +int pcibios_alloc_irq(struct pci_dev *dev)
> +{
> + if (!acpi_disabled)
> + acpi_pci_irq_enable(dev);
> +
> + return 0;
> +}
> +
> +struct acpi_pci_generic_root_info {
> + struct acpi_pci_root_info common;
> + struct pci_config_window *cfg; /* config space mapping */
> +};
> +
> +int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
> +{
> + struct pci_config_window *cfg = bus->sysdata;
> + struct acpi_device *adev = to_acpi_device(cfg->parent);
> + struct acpi_pci_root *root = acpi_driver_data(adev);
> +
> + return root->segment;
> +}
> +
> +int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
> +{
> + struct pci_config_window *cfg;
> + struct acpi_device *adev;
> + struct device *bus_dev;
> +
> + if (acpi_disabled)
> + return 0;
> +
> + cfg = bridge->bus->sysdata;
> +
> + /*
> + * On Hyper-V there is no corresponding ACPI device for a root bridge,
> + * therefore ->parent is set as NULL by the driver. And set 'adev' as
> + * NULL in this case because there is no proper ACPI device.
> + */
> + if (!cfg->parent)
> + adev = NULL;
> + else
> + adev = to_acpi_device(cfg->parent);
> +
> + bus_dev = &bridge->bus->dev;
> +
> + ACPI_COMPANION_SET(&bridge->dev, adev);
> + set_dev_node(bus_dev, acpi_get_node(acpi_device_handle(adev)));
> +
> + return 0;
> +}
> +
> +static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
> +{
> + struct resource_entry *entry, *tmp;
> + int status;
> +
> + status = acpi_pci_probe_root_resources(ci);
> + resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
> + if (!(entry->res->flags & IORESOURCE_WINDOW))
> + resource_list_destroy_entry(entry);
> + }
> + return status;
> +}
> +
> +/*
> + * Lookup the bus range for the domain in MCFG, and set up config space
> + * mapping.
> + */
> +static struct pci_config_window *
> +pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
> +{
> + struct device *dev = &root->device->dev;
> + struct resource *bus_res = &root->secondary;
> + u16 seg = root->segment;
> + const struct pci_ecam_ops *ecam_ops;
> + struct resource cfgres;
> + struct acpi_device *adev;
> + struct pci_config_window *cfg;
> + int ret;
> +
> + ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops);
> + if (ret) {
> + dev_err(dev, "%04x:%pR ECAM region not found\n", seg, bus_res);
> + return NULL;
> + }
> +
> + adev = acpi_resource_consumer(&cfgres);
> + if (adev)
> + dev_info(dev, "ECAM area %pR reserved by %s\n", &cfgres,
> + dev_name(&adev->dev));
> + else
> + dev_warn(dev, FW_BUG "ECAM area %pR not reserved in ACPI namespace\n",
> + &cfgres);
> +
> + cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
> + if (IS_ERR(cfg)) {
> + dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
> + PTR_ERR(cfg));
> + return NULL;
> + }
> +
> + return cfg;
> +}
> +
> +/* release_info: free resources allocated by init_info */
> +static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
> +{
> + struct acpi_pci_generic_root_info *ri;
> +
> + ri = container_of(ci, struct acpi_pci_generic_root_info, common);
> + pci_ecam_free(ri->cfg);
> + kfree(ci->ops);
> + kfree(ri);
> +}
> +
> +/* Interface called from ACPI code to setup PCI host controller */
> +struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
> +{
> + struct acpi_pci_generic_root_info *ri;
> + struct pci_bus *bus, *child;
> + struct acpi_pci_root_ops *root_ops;
> + struct pci_host_bridge *host;
> +
> + ri = kzalloc(sizeof(*ri), GFP_KERNEL);
> + if (!ri)
> + return NULL;
> +
> + root_ops = kzalloc(sizeof(*root_ops), GFP_KERNEL);
> + if (!root_ops) {
> + kfree(ri);
> + return NULL;
> + }
> +
> + ri->cfg = pci_acpi_setup_ecam_mapping(root);
> + if (!ri->cfg) {
> + kfree(ri);
> + kfree(root_ops);
> + return NULL;
> + }
> +
> + root_ops->release_info = pci_acpi_generic_release_info;
> + root_ops->prepare_resources = pci_acpi_root_prepare_resources;
> + root_ops->pci_ops = (struct pci_ops *)&ri->cfg->ops->pci_ops;
> + bus = acpi_pci_root_create(root, root_ops, &ri->common, ri->cfg);
> + if (!bus)
> + return NULL;
> +
> + /* If we must preserve the resource configuration, claim now */
> + host = pci_find_host_bridge(bus);
> + if (host->preserve_config)
> + pci_bus_claim_resources(bus);
> +
> + /*
> + * Assign whatever was left unassigned. If we didn't claim above,
> + * this will reassign everything.
> + */
> + pci_assign_unassigned_root_bus_resources(bus);
> +
> + list_for_each_entry(child, &bus->children, node)
> + pcie_bus_configure_settings(child);
> +
> + return bus;
> +}
> +
> +void pcibios_add_bus(struct pci_bus *bus)
> +{
> + acpi_pci_add_bus(bus);
> +}
> +
> +void pcibios_remove_bus(struct pci_bus *bus)
> +{
> + acpi_pci_remove_bus(bus);
> +}
> +
> +#endif
> --
> 2.39.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel