[PATCH v2 4/6] clk: qcom: mmcc-msm8998: Don't check halt bit on some branch clks

[Konrad Dybcio]

Some branch clocks are governed externally and we're only supposed to
send a request concerning their shutdown, not actually ensure it happens.

Use the BRANCH_HALT_SKIP define to skip checking the halt bit.

Fixes: d14b15b5931c ("clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver")
Reviewed-by: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 drivers/clk/qcom/mmcc-msm8998.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/qcom/mmcc-msm8998.c b/drivers/clk/qcom/mmcc-msm8998.c
index c62aa270af1c..d0a5440e2291 100644
--- a/drivers/clk/qcom/mmcc-msm8998.c
+++ b/drivers/clk/qcom/mmcc-msm8998.c
@@ -2452,6 +2452,7 @@ static struct clk_branch fd_ahb_clk = {
 
 static struct clk_branch mnoc_ahb_clk = {
 	.halt_reg = 0x5024,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x5024,
 		.enable_mask = BIT(0),
@@ -2467,6 +2468,7 @@ static struct clk_branch mnoc_ahb_clk = {
 
 static struct clk_branch bimc_smmu_ahb_clk = {
 	.halt_reg = 0xe004,
+	.halt_check = BRANCH_HALT_SKIP,
 	.hwcg_reg = 0xe004,
 	.hwcg_bit = 1,
 	.clkr = {
@@ -2484,6 +2486,7 @@ static struct clk_branch bimc_smmu_ahb_clk = {
 
 static struct clk_branch bimc_smmu_axi_clk = {
 	.halt_reg = 0xe008,
+	.halt_check = BRANCH_HALT_SKIP,
 	.hwcg_reg = 0xe008,
 	.hwcg_bit = 1,
 	.clkr = {

-- 
2.41.0