Re: [PATCH 2/3] gpio: sprd: In the sleep state, the eic dbnc clk must be forced open

[Chunyan Zhang]

On Tue, 8 Aug 2023 at 11:32, Wenhua Lin <Wenhua.Lin@xxxxxxxxxx> wrote:
>
> In the sleep state, Eic dbnc has no clock and the clk enable

Does "dbnc" mean "debounce"? I suggest not using abbreviation here.

> of dbnc needs to be forced open, so that eic can wake up normally.
>
> Signed-off-by: Wenhua Lin <Wenhua.Lin@xxxxxxxxxx>
> ---
>  drivers/gpio/gpio-eic-sprd.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c
> index 0d85d9e80848..c506cfd6df8e 100644
> --- a/drivers/gpio/gpio-eic-sprd.c
> +++ b/drivers/gpio/gpio-eic-sprd.c
> @@ -23,6 +23,7 @@
>  #define SPRD_EIC_DBNC_IC               0x24
>  #define SPRD_EIC_DBNC_TRIG             0x28
>  #define SPRD_EIC_DBNC_CTRL0            0x40
> +#define SPRD_EIC_DBNC_FORCE_CLK                0x8000
>
>  #define SPRD_EIC_LATCH_INTEN           0x0
>  #define SPRD_EIC_LATCH_INTRAW          0x4
> @@ -213,6 +214,7 @@ static int sprd_eic_set_debounce(struct gpio_chip *chip, unsigned int offset,
>         u32 value = readl_relaxed(base + reg) & ~SPRD_EIC_DBNC_MASK;
>
>         value |= (debounce / 1000) & SPRD_EIC_DBNC_MASK;
> +       value |= SPRD_EIC_DBNC_FORCE_CLK;
>         writel_relaxed(value, base + reg);
>
>         return 0;
> --
> 2.17.1
>