[PATCH v2 00/13] Another round of K3 DTSI disables

[Andrew Davis]

Hello all,

Similar to a couple previous series on this, we disable by default
nodes that cannot function standalone.

This helps prevent folks from forgetting to disable unused nodes
in their boards. One benefit of that is you can start out with
an almost empty DTS file for a new board and have it still
function without warnings or misbehaving hardware. Adding as you
go, this helps ease bringup and upstreaming of new boards.

Thanks,
Andrew

Changes for v2:
 - Added Reviewed-bys (thanks Dhruva)
 - Removed "default pins" comments for GPIO
 - Reworded message for 12/13 to make it more clear on dtsi files

Andrew Davis (13):
  arm64: dts: ti: k3-j721e: Enable SDHCI nodes at the board level
  arm64: dts: ti: k3-j7200: Enable SDHCI nodes at the board level
  arm64: dts: ti: k3-j721s2: Enable SDHCI nodes at the board level
  arm64: dts: ti: k3-am65: Enable OSPI nodes at the board level
  arm64: dts: ti: k3-j721e: Enable OSPI nodes at the board level
  arm64: dts: ti: k3-j7200: Enable OSPI nodes at the board level
  arm64: dts: ti: k3-am64: Enable OSPI nodes at the board level
  arm64: dts: ti: k3-j721e: Enable GPIO nodes at the board level
  arm64: dts: ti: k3-j721s2: Enable GPIO nodes at the board level
  arm64: dts: ti: k3-j7200: Enable GPIO nodes at the board level
  arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board level
  arm64: dts: ti: k3-am65: Enable TSCADC nodes at the board level
  arm64: dts: ti: k3-am64: Enable TSCADC nodes at the board level

 arch/arm64/boot/dts/ti/k3-am64-main.dtsi      |  2 +
 .../boot/dts/ti/k3-am64-phycore-som.dtsi      |  1 +
 arch/arm64/boot/dts/ti/k3-am642-evm.dts       |  1 +
 arch/arm64/boot/dts/ti/k3-am642-sk.dts        |  5 +-
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   |  6 +-
 arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi       |  4 ++
 .../arm64/boot/dts/ti/k3-am654-base-board.dts |  3 +
 .../boot/dts/ti/k3-am68-sk-base-board.dts     | 24 +-------
 .../dts/ti/k3-j7200-common-proc-board.dts     | 19 ++----
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     |  6 ++
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      |  3 +
 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi   |  1 +
 .../boot/dts/ti/k3-j721e-beagleboneai64.dts   | 60 ++++---------------
 .../dts/ti/k3-j721e-common-proc-board.dts     | 42 ++++---------
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 11 ++++
 .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |  6 ++
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts        | 57 ++----------------
 arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi   |  1 +
 .../dts/ti/k3-j721s2-common-proc-board.dts    | 18 ++----
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    |  6 ++
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     |  2 +
 21 files changed, 91 insertions(+), 187 deletions(-)

-- 
2.39.2