Re: [PATCH] scsi: qla2xxx: Prevent firmware rejection of MBC_GET_RNID_PARAMS

[steve]

Please disregard. It looks like the original patch b68710a8094f reduced 
the amount of data copied off so much that port logins are broken even 
though with my patch the firmware now processes GET_RNID_PARAMS. The 
breakage has been introduced during 6.5 (and propagated into 5.x stable 
branches) so there is some urgency to getting a proper fix.

I will send a short series to revert b68710a8094f and replace it with 
what I think is the correct overrun fix. AFAICT the overrun is only a 
single dword.


--Steve


On 2023-08-09 09:10, Steve Magnani wrote:
> At least some firmware (for example, QLE2692 FW 8.08.231 (d0d5)) 
> returns
> MBS_COMMAND_PARAMETER_ERROR when 
> MBC_GET_RNID_PARAMS(RNID_TYPE_PORT_LOGIN)
> is issued with a transfer length of 4 (DWords). Correct the overrun fix 
> to
> issue a "normal" transfer length and instead limit copy-out of desired
> PLOGI data to the space available for it.
>
> Fixes: b68710a8094f ("scsi: qla2xxx: Fix buffer overrun")
> Signed-off-by: "Steven J. Magnani" <magnani@xxxxxxxx>
> ---
> --- a/drivers/scsi/qla2xxx/qla_init.c	2023-08-01 03:46:21.727114453 
> -0500
> +++ b/drivers/scsi/qla2xxx/qla_init.c	2023-08-08 23:18:46.475286995 
> -0500
> @@ -5549,7 +5549,8 @@ static void qla_get_login_template(scsi_
>  	__be32 *q;
>
>  	memset(ha->init_cb, 0, ha->init_cb_size);
> -	sz = min_t(int, sizeof(struct fc_els_csp), ha->init_cb_size);
> +	/* At least some firmware requires sz > sizeof(fc_els_csp) */
> +	sz = min_t(int, sizeof(struct fc_els_flogi), ha->init_cb_size);
>  	rval = qla24xx_get_port_login_templ(vha, ha->init_cb_dma,
>  					    ha->init_cb, sz);
>  	if (rval != QLA_SUCCESS) {
> @@ -5560,6 +5561,7 @@ static void qla_get_login_template(scsi_
>  	q = (__be32 *)&ha->plogi_els_payld.fl_csp;
>
>  	bp = (uint32_t *)ha->init_cb;
> +	sz = min_t(u32, sizeof(struct fc_els_csp), sz);
>  	cpu_to_be32_array(q, bp, sz / 4);
>  	ha->flags.plogi_template_valid = 1;
>  }