[PATCH v11 0/9] Fix wakeup problems on some AMD platforms

[Mario Limonciello]

Problems have been reported on AMD laptops with suspend/resume
where particular root ports are put into D3 and then the system is unable
to resume properly.

The issue boils down to the currently selected kernel policy for root port
behavior at suspend time:
0) If the machine is from 2015 or later
1) If a PCIe root port is power manageable by the platform then platform
   will be used to determine the power state of the root port at suspend.
2) If the PCIe root is not power manageable by the platform then the kernel
   will check if it was configured to wakeup.
3) If it was, then it will be put into the deepest state that supports
   wakeup from PME.
4) If it wasn't, then it will be put into D3hot.

This patch series adjusts it so that device constraints for low power idle
are considered if the device is not power manageable by the platform.

Mario Limonciello (9):
  ACPI: Add comments to clarify some #ifdef statements
  ACPI: Adjust #ifdef for *_lps0_dev use
  ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table
  ACPI: x86: s2idle: Add more debugging for AMD constraints parsing
  ACPI: x86: s2idle: Store if constraint is enabled
  ACPI: x86: s2idle: Add a function to get constraints for a device
  PCI: ACPI: Add helper functions for converting ACPI <->PCI states
  PCI: Split PME state selection into a local static function
  PCI: ACPI: Use device constraints to decide PCI target state fallback
    policy

 drivers/acpi/x86/s2idle.c | 75 ++++++++++++++++++++---------
 drivers/pci/pci-acpi.c    | 99 +++++++++++++++++++++++++--------------
 drivers/pci/pci.c         | 53 ++++++++++++++-------
 drivers/pci/pci.h         |  5 ++
 include/linux/acpi.h      | 14 ++++--
 5 files changed, 171 insertions(+), 75 deletions(-)


base-commit: 13b9372068660fe4f7023f43081067376582ef3c
-- 
2.34.1