Re: [PATCH 0/2] PCI: qcom: Enable ASPM on host bridge and devices

[Steev Klimaszewski]

On Wed, Aug 9, 2023 at 3:19 AM Manivannan Sadhasivam
<manivannan.sadhasivam@xxxxxxxxxx> wrote:
>
> Hi,
>
> This series enables ASPM by default on the host bridge and devices of selected
> Qcom platforms.
>
> The motivation behind enabling ASPM in the controller driver is provided in the
> commit message of patch 2/2.
>
> This series has been tested on SC8280-CRD and Lenovo Thinkpad X13s laptop
> and it helped save ~0.6W of power during runtime.
>
> - Mani
>
> Manivannan Sadhasivam (2):
>   PCI: dwc: Add host_post_init() callback
>   PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops
>
>  .../pci/controller/dwc/pcie-designware-host.c |  3 ++
>  drivers/pci/controller/dwc/pcie-designware.h  |  1 +
>  drivers/pci/controller/dwc/pcie-qcom.c        | 28 +++++++++++++++++++
>  3 files changed, 32 insertions(+)
>
> --
> 2.25.1
>
While not extremely scientific, and I don't have any way to measure
the power usage on my Thinkpad X13s, with these patches applied, I've
only gone down 29% battery power in the past 6 hours, suspend and
resume cycles don't see any issues either.

Tested-by: Steev Klimaszewski <steev@xxxxxxxx>