Re: [PATCH v3 3/5] net: ti: icss-iep: Add IEP driver

[Roger Quadros]

On 10/08/2023 14:50, Md Danish Anwar wrote:
> Hi Andrew,
> 
> On 09/08/23 8:30 pm, Andrew Davis wrote:
>> On 8/9/23 6:49 AM, MD Danish Anwar wrote:
>>> From: Roger Quadros <rogerq@xxxxxx>
>>>
>>> Add a driver for Industrial Ethernet Peripheral (IEP) block of PRUSS to
>>> support timestamping of ethernet packets and thus support PTP and PPS
>>> for PRU ethernet ports.
>>>
>>> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
>>> Signed-off-by: Lokesh Vutla <lokeshvutla@xxxxxx>
>>> Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx>
>>> Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
>>> Signed-off-by: MD Danish Anwar <danishanwar@xxxxxx>
>>> ---
>>>   drivers/net/ethernet/ti/Kconfig          |  12 +
>>>   drivers/net/ethernet/ti/Makefile         |   1 +
>>>   drivers/net/ethernet/ti/icssg/icss_iep.c | 935 +++++++++++++++++++++++
>>>   drivers/net/ethernet/ti/icssg/icss_iep.h |  38 +
>>>   4 files changed, 986 insertions(+)
>>>   create mode 100644 drivers/net/ethernet/ti/icssg/icss_iep.c
>>>   create mode 100644 drivers/net/ethernet/ti/icssg/icss_iep.h
>>>
>>> diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
>>> index 63e510b6860f..88b5b1b47779 100644
>>> --- a/drivers/net/ethernet/ti/Kconfig
>>> +++ b/drivers/net/ethernet/ti/Kconfig
>>> @@ -186,6 +186,7 @@ config CPMAC
>>>   config TI_ICSSG_PRUETH
>>>       tristate "TI Gigabit PRU Ethernet driver"
>>>       select PHYLIB
>>> +    select TI_ICSS_IEP
>>
>> Why not save selecting this until you add its use in the ICSSG_PRUETH driver in
>> the next patch.
>>
> 
> The next patch is only adding changes to icssg-prueth .c /.h files. This patch
> is adding changes to Kconfig and the Makefile. To keep it that way selecting
> this is added in this patch. No worries, I will move this to next patch.
> 
>> [...]
>>
>>> +
>>> +static u32 icss_iep_readl(struct icss_iep *iep, int reg)
>>> +{
>>> +    return readl(iep->base + iep->plat_data->reg_offs[reg]);
>>> +}
>>
>> Do these one line functions really add anything? Actually why
>> not use the regmap you have here.
> 
> These one line functions are not really adding anything but they are acting as
> a wrapper around readl /writel and providing some sort of encapsulation as
> directly calling readl will result in a little complicated code.
> 
> /* WIth One line function */
> ts_lo = icss_iep_readl(iep, ICSS_IEP_COUNT_REG0);
> 
> /* Without one line function */
> ts_lo = readl(iep->base, iep->plat_data->reg_offs[ICSS_IEP_COUNT_REG0]);
> 
> Previously regmap was used in this driver. But in older commit [1] in
> 5.10-ti-linux-kernel (Before I picked the driver for upstream) it got changed
> to readl / writel stating that regmap_read / write is too slow. IEP is time
> sensitive and needs faster read and write, probably because of this they
> changed it.

This is true. Can you please pick the exact reasoning mentioned there
and put it as a comment where you use read/writel() instead of regmap()
so we don't forget this and accidentally switch it back to regmap()
in the future.

I think this is only required for read/write to the IEP count register and
SYNC_CTRL_REG when doing gettime/settime.

-- 
cheers,
-roger