Re: [PATCH v2 2/4] ARM: dts: st: stm32mp157c-emstamp: correct regulator-active-discharge

[Alexandre TORGUE]

On 7/30/23 19:49, Krzysztof Kozlowski wrote:
> The "regulator-active-discharge" property is uint32, not boolean:
>
>    stm32mp157c-emsbc-argon.dtb: stpmic@33: regulators:pwr_sw1:regulator-active-discharge: True is not of type 'array'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>
> ---
>
> Changes in v2:
> 1. None
> ---
>   arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
> index f8e9980ed3d4..009209ca673b 100644
> --- a/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
> +++ b/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
> @@ -320,7 +320,7 @@ bst_out: boost {
>   			vbus_otg: pwr_sw1 {
>   				regulator-name = "vbus_otg";
>   				interrupts = <IT_OCP_OTG 0>;
> -				regulator-active-discharge;
> +				regulator-active-discharge = <1>;
>   			};
>   
>   			vbus_usbh: pwr_sw2 {

Applied on stm32-next.

Thanks.
Alex