Re: [PATCH 3/3] arm64: dts: ti: Add support for the AM62P5-SK
From: Andrew Davis
Date: Thu Aug 10 2023 - 17:19:30 EST
On 8/9/23 11:53 PM, Vignesh Raghavendra wrote:
From: Bryan Brattlof <bb@xxxxxx>
Add basic support for the AM62P5-SK platform with UART and ramdisk as
We usually call the boards "SK-AM6xx", with the SK- first, assuming this
board is named the same way you should fix that here and in the files.
rootfs.
Schematics is at https://www.ti.com/lit/zip/sprr487
Signed-off-by: Bryan Brattlof <bb@xxxxxx>
Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
---
arch/arm64/boot/dts/ti/Makefile | 3 +
arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 169 ++++++++++++++++++++++++
2 files changed, 172 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 437a3d7e8e3a..5a09cad74c44 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -23,6 +23,9 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
# Boards with AM62Ax SoC
dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
+# Boards with AM62Px SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
+
# Boards with AM64x SoC
dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
new file mode 100644
index 000000000000..b0882211448e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the AM62P5-SK
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Schematics: https://www.ti.com/lit/zip/sprr487
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+
+/ {
+ compatible = "ti,am62p5-sk", "ti,am62p5";
+ model = "Texas Instruments AM62P5 SK";
+
+ aliases {
+ serial0 = &wkup_uart0;
+ serial2 = &main_uart0;
+ serial3 = &main_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
You can set the path here directly to the node:
stdout-path = &main_uart0;
Then the default baud rate can be defined/selected in
the node with:
current-speed = <115200>;
+ };
+
+ memory@80000000 {
+ /* 8G RAM */
+ reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+ <0x00000008 0x80000000 0x00000001 0x80000000>;
+ device_type = "memory";
+ bootph-pre-ram;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ secure_tfa_ddr: tfa@9e780000 {
+ reg = <0x00 0x9e780000 0x00 0x80000>;
+ alignment = <0x1000>;
You cannot allocate from this memory, no need for alignment.
+ no-map;
+ };
+
+ secure_ddr: optee@9e800000 {
+ reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+ alignment = <0x1000>;
Same.
+ no-map;
+ };
+
+ wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9c900000 0x00 0x01e00000>;
+ no-map;
+ };
+ };
+};
+
+&cbass_main {
+ bootph-pre-ram;
I'm thinking we will need this for any AM62P based board, should
we bubble this up into the common .dtsi files? Same for most of the
other instances at the end of this file.
Andrew
+};
+
+&main_pmx0 {
+ status = "okay";
+ bootph-pre-ram;
+
+ main_uart0_pins_default: main-uart0-default-pins {
+ bootph-pre-ram;
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x1c8, PIN_INPUT, 0) /* (A22) UART0_RXD */
+ AM62PX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */
+ AM62PX_IOPAD(0x1d0, PIN_INPUT, 0) /* (A23) UART0_CTSn */
+ AM62PX_IOPAD(0x1d4, PIN_OUTPUT, 0) /* (C22) UART0_RTSn */
+ >;
+ };
+
+ main_uart1_pins_default: main-uart1-default-pins {
+ bootph-pre-ram;
+ pinctrl-single,pins = <
+ AM62PX_IOPAD(0x194, PIN_INPUT, 2) /* (D25) MCASP0_AXR3 */
+ AM62PX_IOPAD(0x198, PIN_OUTPUT, 2) /* (E25) MCASP0_AXR2 */
+ AM62PX_IOPAD(0x1ac, PIN_INPUT, 2) /* (G23) MCASP0_AFSR */
+ AM62PX_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (G20) MCASP0_ACLKR */
+ >;
+ };
+};
+
+&main_timer0 {
+ bootph-pre-ram;
+};
+
+&main_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_uart0_pins_default>;
+ status = "okay";
+ bootph-pre-ram;
+};
+
+&main_uart1 {
+ /* Main UART1 is used by TIFS firmware */
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_uart1_pins_default>;
+ status = "reserved";
+ bootph-pre-ram;
+};
+
+&cbass_mcu {
+ bootph-pre-ram;
+};
+
+&mcu_pmx0 {
+ status = "okay";
+ bootph-pre-ram;
+
+ wkup_uart0_pins_default: wkup-uart0-default-pins {
+ bootph-pre-ram;
+ pinctrl-single,pins = <
+ AM62PX_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */
+ AM62PX_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */
+ AM62PX_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */
+ AM62PX_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */
+ >;
+ };
+};
+
+&cbass_wakeup {
+ bootph-pre-ram;
+};
+
+&wkup_uart0 {
+ /* WKUP UART0 is used by DM firmware */
+ pinctrl-names = "default";
+ pinctrl-0 = <&wkup_uart0_pins_default>;
+ status = "reserved";
+ bootph-pre-ram;
+};
+
+&wkup_conf {
+ bootph-pre-ram;
+};
+
+&chipid {
+ bootph-pre-ram;
+};
+
+&dmss {
+ bootph-pre-ram;
+};
+
+&dmsc {
+ bootph-pre-ram;
+};
+
+&k3_pds {
+ bootph-pre-ram;
+};
+
+&k3_clks {
+ bootph-pre-ram;
+};
+
+&k3_reset {
+ bootph-pre-ram;
+};
+
+&secure_proxy_main {
+ bootph-pre-ram;
+};