Re: [-next v1 0/1] Fix StarFive JH7110 gmac TCP RX speed issue

[Guo Samin]

On 2023/8/10 23:37:13, Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> 
> On Thu, 10 Aug 2023 15:46:45 +0800, Samin Guo wrote:
>> This patch fixes the StarFive JH7110 gmac TCP RX slow issue. And it has been
>> tested on VisionFive 2.
>>
>> Here is the result of the test (iperf3):
>>
>>   Before:
>>       # iperf3 -s
>>       -----------------------------------------------------------
>>       Server listening on 5201 (test #1)
>>       -----------------------------------------------------------
>>       Accepted connection from 192.168.1.4, port 47604
>>       [  5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612
>>       [ ID] Interval           Transfer     Bitrate
>>       [  5]   0.00-1.00   sec  36.3 MBytes   305 Mbits/sec
>>       [  5]   1.00-2.00   sec  35.6 MBytes   299 Mbits/sec
>>       [  5]   2.00-3.00   sec  36.5 MBytes   306 Mbits/sec
>>       [  5]   3.00-4.00   sec  36.5 MBytes   306 Mbits/sec
>>       [  5]   4.00-5.00   sec  35.7 MBytes   300 Mbits/sec
>>       [  5]   5.00-6.00   sec  35.4 MBytes   297 Mbits/sec
>>       [  5]   6.00-7.00   sec  37.1 MBytes   311 Mbits/sec
>>       [  5]   7.00-8.00   sec  35.6 MBytes   298 Mbits/sec
>>       [  5]   8.00-9.00   sec  36.4 MBytes   305 Mbits/sec
>>       [  5]   9.00-10.00  sec  36.3 MBytes   304 Mbits/sec
>>       - - - - - - - - - - - - - - - - - - - - - - - - -
>>       [ ID] Interval           Transfer     Bitrate
>>       [  5]   0.00-10.00  sec   361 MBytes   303 Mbits/sec        receiver
>>
>> [...]
> 
> Applied to riscv-dt-for-next with the conversion to decimal, thanks!
> 
> [1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration
>       https://git.kernel.org/conor/c/1273f7e96a70
> 
> Thanks,
> Conor.

Hi Conor，

Thank a lot for for merging into the next branch so promptly！
 
Best regards,
Samin