Re: [PATCH V5 net-next 1/2] net: fec: add XDP_TX feature support

[Simon Horman]

On Thu, Aug 10, 2023 at 02:45:13PM +0800, Wei Fang wrote:
> The XDP_TX feature is not supported before, and all the frames
> which are deemed to do XDP_TX action actually do the XDP_DROP
> action. So this patch adds the XDP_TX support to FEC driver.
> 
> I tested the performance of XDP_TX in XDP_DRV mode and XDP_SKB
> mode respectively on i.MX8MP-EVK platform, and as suggested by
> Jesper, I also tested the performance of XDP_REDIRECT on the
> same platform. And the test steps and results are as follows.
> 
> XDP_TX test:
> Step 1: One board is used as generator and connects to switch,and
> the FEC port of DUT also connects to the switch. Both boards with
> flow control off. Then the generator runs the
> pktgen_sample03_burst_single_flow.sh script to generate and send
> burst traffic to DUT. Note that the size of packet was set to 64
> bytes and the procotol of packet was UDP in my test scenario. In
> addtion, the SMAC of the packet need to be different from the MAC

nit: addtion -> addition

     checkpatch.pl --codespell is your friend here.

...