[RFC net-next v1 0/5] Add MACsec support for TJA11XX C45 PHYs

[Radu Pirea (NXP OSS)]

This is the MACsec support for TJA11XX PHYs. The MACsec block encrypts
the ethernet frames on the fly and has no buffering. This operation will
grow the frames by 32 bytes. If the frames are sent back to back, the
MACsec block will not have enough room to insert the SecTAG and the ICV
and the frames will be dropped. 

To mitigate this, the PHY can parse a specific ethertype with some
padding bytes and replace them with the SecTAG and ICV. These padding
bytes might be dummy or might contain information about TX SC that must
be used to encrypt the frame.

On the RX path, the PHY can insert a similar tag that contains
information about the RX SC which received the frame. However, the RX tag
is not enabled in this patch series, but I consider this important for the
review.

Radu P.

Radu Pirea (NXP OSS) (5):
  net: macsec: declare macsec_pn_wrapped shim
  net: phy: remove MACSEC guard
  net: phy: nxp-c45-tja11xx add MACsec support
  net: macsec: introduce mdo_insert_tx_tag
  net: phy: nxp-c45-tja11xx: implement mdo_insert_tx_tag

 MAINTAINERS                              |    2 +-
 drivers/net/macsec.c                     |   79 +
 drivers/net/phy/Makefile                 |    2 +-
 drivers/net/phy/nxp-c45-tja11xx-macsec.c | 1878 ++++++++++++++++++++++
 drivers/net/phy/nxp-c45-tja11xx.c        |   72 +-
 drivers/net/phy/nxp-c45-tja11xx.h        |   37 +
 include/linux/phy.h                      |    2 -
 include/net/macsec.h                     |   12 +
 8 files changed, 2051 insertions(+), 33 deletions(-)
 create mode 100644 drivers/net/phy/nxp-c45-tja11xx-macsec.c
 create mode 100644 drivers/net/phy/nxp-c45-tja11xx.h

-- 
2.34.1