Re: [PATCH] dmaengine: ioat: fixing the wrong chancnt

[Dave Jiang]

On 8/11/23 01:16, Yajun Deng wrote:
> The chancnt would be updated in __dma_async_device_channel_register(),
> but it was assigned in ioat_enumerate_channels(). Therefore chancnt has
> the wrong value.
>
> Clear chancnt before calling dma_async_device_register().
>
> Signed-off-by: Yajun Deng <yajun.deng@xxxxxxxxx>

Thank you for the patch Yajun.

While this may work, it clobbers the chancnt read from the hardware. I 
think the preferable fix is to move the value read from the hardware in 
ioat_enumerate_channels() and its current usages to 'struct 
ioatdma_device' and leave dma->chancnt unchanged in that function so 
that zeroing it later is not needed.

Also, have you tested this patch or is this just from visual inspection?

And need a fixes tag.

> ---
>   drivers/dma/ioat/init.c | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c
> index c4602bfc9c74..928fc8a83a36 100644
> --- a/drivers/dma/ioat/init.c
> +++ b/drivers/dma/ioat/init.c
> @@ -536,8 +536,11 @@ static int ioat_probe(struct ioatdma_device *ioat_dma)
>   
>   static int ioat_register(struct ioatdma_device *ioat_dma)
>   {
> -	int err = dma_async_device_register(&ioat_dma->dma_dev);
> +	int err;
> +
> +	ioat_dma->dma_dev.chancnt = 0;
>   
> +	err = dma_async_device_register(&ioat_dma->dma_dev);
>   	if (err) {
>   		ioat_disable_interrupts(ioat_dma);
>   		dma_pool_destroy(ioat_dma->completion_pool);