Re: [PATCH v4] dt-bindings: net: ftgmac100: convert to yaml version from txt

[Ivan Mikhaylov]

On Sat, 2023-08-05 at 16:53 +0300, Ivan Mikhaylov wrote:
> Conversion from ftgmac100.txt to yaml format version.
> 
> Signed-off-by: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
> ---
>  .../bindings/net/faraday,ftgmac100.yaml       | 102
> ++++++++++++++++++
>  .../devicetree/bindings/net/ftgmac100.txt     |  67 ------------
>  2 files changed, 102 insertions(+), 67 deletions(-)
>  create mode 100644
> Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
>  delete mode 100644
> Documentation/devicetree/bindings/net/ftgmac100.txt
> 
> diff --git
> a/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
> b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
> new file mode 100644
> index 000000000000..9bcbacb6640d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
> @@ -0,0 +1,102 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Faraday Technology FTGMAC100 gigabit ethernet controller
> +
> +allOf:
> +  - $ref: ethernet-controller.yaml#
> +
> +maintainers:
> +  - Po-Yu Chuang <ratbert@xxxxxxxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: faraday,ftgmac100
> +      - items:
> +          - enum:
> +              - aspeed,ast2400-mac
> +              - aspeed,ast2500-mac
> +              - aspeed,ast2600-mac
> +          - const: faraday,ftgmac100
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 1
> +    items:
> +      - description: MAC IP clock
> +      - description: RMII RCLK gate for AST2500/2600
> +
> +  clock-names:
> +    minItems: 1
> +    items:
> +      - const: MACCLK
> +      - const: RCLK
> +
> +  phy-mode:
> +    enum:
> +      - rgmii
> +      - rmii
> +
> +  phy-handle: true
> +
> +  use-ncsi:
> +    description:
> +      Use the NC-SI stack instead of an MDIO PHY. Currently assumes
> +      rmii (100bT) but kept as a separate property in case NC-SI
> grows support
> +      for a gigabit link.
> +    type: boolean
> +
> +  no-hw-checksum:
> +    description:
> +      Used to disable HW checksum support. Here for backward
> +      compatibility as the driver now should have correct defaults
> based on
> +      the SoC.
> +    type: boolean
> +    deprecated: true
> +
> +  mdio:
> +    $ref: /schemas/net/mdio.yaml#
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    ethernet@1e660000 {
> +        compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
> +        reg = <0x1e660000 0x180>;
> +        interrupts = <2>;
> +        use-ncsi;
> +    };
> +
> +    ethernet@1e680000 {
> +        compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
> +        reg = <0x1e680000 0x180>;
> +        interrupts = <2>;
> +
> +        phy-handle = <&phy>;
> +        phy-mode = "rgmii";
> +
> +        mdio {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            phy: ethernet-phy@1 {
> +                compatible = "ethernet-phy-ieee802.3-c22";
> +                reg = <1>;
> +            };
> +        };
> +    };
> diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt
> b/Documentation/devicetree/bindings/net/ftgmac100.txt
> deleted file mode 100644
> index 29234021f601..000000000000
> --- a/Documentation/devicetree/bindings/net/ftgmac100.txt
> +++ /dev/null
> @@ -1,67 +0,0 @@
> -* Faraday Technology FTGMAC100 gigabit ethernet controller
> -
> -Required properties:
> -- compatible: "faraday,ftgmac100"
> -
> -  Must also contain one of these if used as part of an Aspeed
> AST2400
> -  or 2500 family SoC as they have some subtle tweaks to the
> -  implementation:
> -
> -     - "aspeed,ast2400-mac"
> -     - "aspeed,ast2500-mac"
> -     - "aspeed,ast2600-mac"
> -
> -- reg: Address and length of the register set for the device
> -- interrupts: Should contain ethernet controller interrupt
> -
> -Optional properties:
> -- phy-handle: See ethernet.txt file in the same directory.
> -- phy-mode: See ethernet.txt file in the same directory. If the
> property is
> -  absent, "rgmii" is assumed. Supported values are "rgmii*" and
> "rmii" for
> -  aspeed parts. Other (unknown) parts will accept any value.
> -- use-ncsi: Use the NC-SI stack instead of an MDIO PHY. Currently
> assumes
> -  rmii (100bT) but kept as a separate property in case NC-SI grows
> support
> -  for a gigabit link.
> -- no-hw-checksum: Used to disable HW checksum support. Here for
> backward
> -  compatibility as the driver now should have correct defaults based
> on
> -  the SoC.
> -- clocks: In accordance with the generic clock bindings. Must
> describe the MAC
> -  IP clock, and optionally an RMII RCLK gate for the
> AST2500/AST2600. The
> -  required MAC clock must be the first cell.
> -- clock-names:
> -
> -      - "MACCLK": The MAC IP clock
> -      - "RCLK": Clock gate for the RMII RCLK
> -
> -Optional subnodes:
> -- mdio: See mdio.txt file in the same directory.
> -
> -Example:
> -
> -       mac0: ethernet@1e660000 {
> -               compatible = "aspeed,ast2500-mac",
> "faraday,ftgmac100";
> -               reg = <0x1e660000 0x180>;
> -               interrupts = <2>;
> -               use-ncsi;
> -       };
> -
> -Example with phy-handle:
> -
> -       mac1: ethernet@1e680000 {
> -               compatible = "aspeed,ast2500-mac",
> "faraday,ftgmac100";
> -               reg = <0x1e680000 0x180>;
> -               interrupts = <2>;
> -
> -               phy-handle = <&phy>;
> -               phy-mode = "rgmii";
> -
> -               mdio {
> -                       #address-cells = <1>;
> -                       #size-cells = <0>;
> -
> -                       phy: ethernet-phy@1 {
> -                               compatible = "ethernet-phy-ieee802.3-
> c22";
> -                               reg = <1>;
> -                       };
> -               };
> -       };

Gentle ping, I think I resolved all comments related, anything else?

Thanks.