Re: [PATCH v2 2/3] iio: pressure: bmp280: Use i2c_get_match_data

[Angel Iglesias]

On Mon, 2023-08-14 at 06:57 +0000, Biju Das wrote:
> Hi Angel Iglesias,
> 
> 
> > Subject: Re: [PATCH v2 2/3] iio: pressure: bmp280: Use i2c_get_match_data
> > 
> > On Sun, 2023-08-13 at 21:03 +0200, Angel Iglesias wrote:
> > > Replaces device_get_match_data() and fallback match_id logic by new
> > > unified helper function i2c_get_match_data().
> > > 
> > > Signed-off-by: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
> > > 
> > > diff --git a/drivers/iio/pressure/bmp280-i2c.c
> > > b/drivers/iio/pressure/bmp280- i2c.c index 693eb1975fdc..34e3bc758493
> > > 100644
> > > --- a/drivers/iio/pressure/bmp280-i2c.c
> > > +++ b/drivers/iio/pressure/bmp280-i2c.c
> > > @@ -11,9 +11,7 @@ static int bmp280_i2c_probe(struct i2c_client
> > > *client)
> > >         const struct bmp280_chip_info *chip_info;
> > >         struct regmap *regmap;
> > > 
> > > -       chip_info = device_get_match_data(&client->dev);
> > > -       if (!chip_info)
> > > -               chip_info = (const struct bmp280_chip_info *)
> > > id->driver_data;
> > > +       chip_info = i2c_get_match_data(client);
> > > 
> > >         regmap = devm_regmap_init_i2c(client,
> > > chip_info->regmap_config);
> > >         if (IS_ERR(regmap)) {
> > 
> > Hi,
> > 
> > I noticed I submitted this change that was also submitted by Biju Das on
> > another
> > patch:
> 
> > Should I drop this patch from the series?
> 
> I think it is ok. Andy is suggesting to use unified table for SPI/I2C
> 
> Is it something do able and testable in your environment? see [1],
> If yes, please create another patch for using unified table for both i2c and
> spi.

I have around a BMP390 with the SPI pins available to test it out. In the case
of the bmp280 we could unify the of_match table as they're almost the same. In
the case of the spi_device_id and i2c_device_id tables, as they're different
structs I'm not sure if they can be unified.

Regarding Andy's comment, I think he's referring to the duplicated chip infos.
In the case of the bmp280, the chip_infos are defined on the common driver code
and used for both SPI and I2C match tables.

> 
> https://lore.kernel.org/linux-renesas-soc/CAHp75VeX+T=hAN+PgtHTdv4b6UtDVgveUUww1b1kuOngzDinFw@xxxxxxxxxxxxxx/T/#t
> 
> Cheers,
> Biju

Kind regards,
Angel