Re: [PATCH v3 1/2] gpio: dt-bindings: add parsing of loongson gpio offset
From: Krzysztof Kozlowski
Date: Mon Aug 14 2023 - 15:19:23 EST
On 14/08/2023 05:39, Yinbo Zhu wrote:
>
>
> 在 2023/8/11 下午10:25, Bartosz Golaszewski 写道:
>> On Thu, Aug 10, 2023 at 8:19 AM Yinbo Zhu <zhuyinbo@xxxxxxxxxxx> wrote:
>>>
>>>
>>>
>>> 在 2023/8/9 下午11:39, Conor Dooley 写道:
>>>> On Wed, Aug 09, 2023 at 03:47:55PM +0800, Yinbo Zhu wrote:
>>>>> 在 2023/8/8 下午8:05, Conor Dooley 写道:
>>>>>> On Mon, Aug 07, 2023 at 03:40:42PM +0800, Yinbo Zhu wrote:
>>>>
>>>>>>> + loongson,gpio-ctrl-mode:
>>>>>>> + $ref: /schemas/types.yaml#/definitions/uint32
>>>>>>> + description:
>>>>>>> + This option indicate this GPIO control mode, where '0' represents
>>>>>>> + bit control mode and '1' represents byte control mode.
>>>>>>
>>>>>> How is one supposed to know which of these modes to use?
>>>>>
>>>>>
>>>>> Byte mode is to access by byte, such as gpio3, the base address of the
>>>>> gpio controller is offset by 3 bytes as the access address of gpio3.
>>>>>
>>>>> The bit mode is the normal mode that like other platform gpio and it is
>>>>> to access by bit.
>>>>>
>>>>> If both modes are supported, it is recommended to prioritize using byte
>>>>> mode that according to spec.
>>>>
>>>> So, sounds like this property should instead be a boolean that notes
>>>> whether the hardware supports the mode or not, rather than the current
>>>> enum used to determine software policy.
>>>
>>>
>>> okay, I got it, I will use boolean,
>>>
>>
>> Why do you want to put it into device-tree so badly? This is not the
>> first driver that would have of_match_data for different variants
>> where you can have a structure that would keep offsets for different
>> models. It's not like you will have hundreds of "compatible" chips
>> anyway, most likely just a few?
>
>
> Using this ways that put offset property into device-tree that can be
> compatible with future GPIO chips without the need to modify drivers,
That's not an argument for putting into DT.
> such as more 2K chips in the future, but use of_match_data and data
> field of_device_id, which every time a new SoC is released, the GPIO
> driver needs to be modified once, which is not friendly to us.
Sorry, "friendly" is again hardly an argument what should or should not
be in DT.
Best regards,
Krzysztof