[PATCH v2 6/6] lkdtm: Fix CFI_BACKWARD on RISC-V

[Sami Tolvanen]

On RISC-V, the return address is before the current frame pointer,
unlike on most other architectures. Use the correct offset on RISC-V
to fix the CFI_BACKWARD test.

Signed-off-by: Sami Tolvanen <samitolvanen@xxxxxxxxxx>
---
 drivers/misc/lkdtm/cfi.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/lkdtm/cfi.c b/drivers/misc/lkdtm/cfi.c
index fc28714ae3a6..6a33889d0902 100644
--- a/drivers/misc/lkdtm/cfi.c
+++ b/drivers/misc/lkdtm/cfi.c
@@ -68,12 +68,20 @@ static void lkdtm_CFI_FORWARD_PROTO(void)
 #define no_pac_addr(addr)      \
 	((__force __typeof__(addr))((uintptr_t)(addr) | PAGE_OFFSET))
 
+#ifdef CONFIG_RISCV
+/* https://github.com/riscv-non-isa/riscv-elf-psabi-doc/blob/master/riscv-cc.adoc#frame-pointer-convention */
+#define FRAME_RA_OFFSET		(-1)
+#else
+#define FRAME_RA_OFFSET		1
+#endif
+
 /* The ultimate ROP gadget. */
 static noinline __no_ret_protection
 void set_return_addr_unchecked(unsigned long *expected, unsigned long *addr)
 {
 	/* Use of volatile is to make sure final write isn't seen as a dead store. */
-	unsigned long * volatile *ret_addr = (unsigned long **)__builtin_frame_address(0) + 1;
+	unsigned long * volatile *ret_addr =
+		(unsigned long **)__builtin_frame_address(0) + FRAME_RA_OFFSET;
 
 	/* Make sure we've found the right place on the stack before writing it. */
 	if (no_pac_addr(*ret_addr) == expected)
@@ -88,7 +96,8 @@ static noinline
 void set_return_addr(unsigned long *expected, unsigned long *addr)
 {
 	/* Use of volatile is to make sure final write isn't seen as a dead store. */
-	unsigned long * volatile *ret_addr = (unsigned long **)__builtin_frame_address(0) + 1;
+	unsigned long * volatile *ret_addr =
+		(unsigned long **)__builtin_frame_address(0) + FRAME_RA_OFFSET;
 
 	/* Make sure we've found the right place on the stack before writing it. */
 	if (no_pac_addr(*ret_addr) == expected)
-- 
2.41.0.694.ge786442a9b-goog