[PATCH v4] PCI/VGA: Make the vga_is_firmware_default() less arch-dependent
From: Sui Jingfeng
Date: Tue Aug 15 2023 - 18:06:11 EST
Currently, the vga_is_firmware_default() function only works on x86 and
ia64, it is a no-op on ARM, ARM64, PPC, RISC-V, etc. This patch completes
the implementation for the rest of the architectures. The added code tries
to identify the PCI(e) VGA device that owns the firmware framebuffer
before PCI resource reallocation happens.
This patch makes the vga_is_firmware_default() function works on whatever
arch that has UEFI GOP support. But we make it available only on platforms
where PCI resource relocation happens. if the provided method proves to be
effective and reliable, it can be expanded to other arch easily.
v2:
* Fix test robot warnnings and fix typos
v3:
* Fix linkage problems if the global screen_info is not exported
v4:
* Handle linkage problems by hiding behind of CONFIG_SYSFB,
* Drop side-effects and simplify.
Since only one GPU could owns the firmware fb in normal case, things
are almost done once we determine the boot VGA selected by firmware.
By using the DECLARE_PCI_FIXUP_CLASS_HEADER(), we also ensure that we
could identify the primary display (if there do have one) before PCI
resource reallocation happen.
The method provided in this patch will be effective as long as the target
platform has a way set up the kernel's screen_info. For the machines with
UEFI firmware, the screen_info is typically set up by the UEFI stub with
respect to the UEFI GOP protocol. Since the UEFI stub executes in the
context of the decompressor, and it cannot access the kernel's screen_info
directly. Hence, the efi stub copies the screen_info provided by firmware
to kernel's counterpart. Therefore, we handle linkage problems by using
the CONFIG_EFI guard. Since when CONFIG_EFI is set, the kernel's
screen_info is guaranteed to be static linkable for arm, arm64, riscv.
V4 of this patch handle linkage problems by hiding behind of CONFIG_SYSFB,
since sysfb reference the global screen_info as well.
This patch is tested on:
1) LS3A5000+LS7A1000 platform with three video cards
$ lspci | grep VGA
00:06.1 VGA compatible controller: Loongson Technology LLC DC (Display Controller) (rev 01)
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Caicos XT [Radeon HD 7470/8470 / R5 235/310 OEM]
07:00.0 VGA compatible controller: S3 Graphics Ltd. Device 9070 (rev 01)
08:00.0 VGA compatible controller: S3 Graphics Ltd. Device 9070 (rev 01)
Before apply this patch:
[ 0.361748] pci 0000:00:06.1: vgaarb: setting as boot VGA device
[ 0.361751] pci 0000:00:06.1: vgaarb: bridge control possible
[ 0.361753] pci 0000:00:06.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.361763] pci 0000:03:00.0: vgaarb: bridge control possible
[ 0.361765] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.361771] pci 0000:07:00.0: vgaarb: bridge control possible
[ 0.361773] pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.361777] pci 0000:08:00.0: vgaarb: bridge control possible
[ 0.361779] pci 0000:08:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.361781] vgaarb: loaded
[ 0.367838] pci 0000:00:06.1: Overriding boot device as 1002:6778
[ 0.367841] pci 0000:00:06.1: Overriding boot device as 5333:9070
[ 0.367843] pci 0000:00:06.1: Overriding boot device as 5333:9070
After apply this patch:
[ 0.357780] pci 0000:03:00.0: vgaarb: BAR 0 contains firmware FB
[ 0.361726] pci 0000:00:06.1: vgaarb: setting as boot VGA device
[ 0.361729] pci 0000:00:06.1: vgaarb: bridge control possible
[ 0.361731] pci 0000:00:06.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.361741] pci 0000:03:00.0: vgaarb: setting as boot VGA device (overriding previous)
[ 0.361743] pci 0000:03:00.0: vgaarb: bridge control possible
[ 0.361745] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.361751] pci 0000:07:00.0: vgaarb: bridge control possible
[ 0.361753] pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.361757] pci 0000:08:00.0: vgaarb: bridge control possible
[ 0.361759] pci 0000:08:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.361761] vgaarb: loaded
[ 14.730255] radeon 0000:03:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
Please note that before apply this patch, vgaarb can not select the right
boot vga due to weird logic introduced with the commit 57fc7323a8e7c ("LoongArch: Add PCI controller support")
Please also note that VARM Bar do moves on LoongArch:
$ dmesg | grep 0000:03:00.0
[ 0.357688] pci 0000:03:00.0: [1002:6778] type 00 class 0x030000
[ 0.357713] pci 0000:03:00.0: reg 0x10: [mem 0xe0050000000-0xe005fffffff 64bit pref]
[ 0.357730] pci 0000:03:00.0: reg 0x18: [mem 0xe0065300000-0xe006531ffff 64bit]
[ 0.357741] pci 0000:03:00.0: reg 0x20: [io 0x20000-0x200ff]
[ 0.357762] pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.357780] pci 0000:03:00.0: vgaarb: BAR0 contains firmware FB
[ 0.359809] pci 0000:03:00.0: BAR 0: assigned [mem 0xe0030000000-0xe003fffffff 64bit pref]
[ 0.359821] pci 0000:03:00.0: BAR 2: assigned [mem 0xe0065200000-0xe006521ffff 64bit]
[ 0.359832] pci 0000:03:00.0: BAR 6: assigned [mem 0xe0065220000-0xe006523ffff pref]
[ 0.359846] pci 0000:03:00.0: BAR 4: assigned [io 0x5000-0x50ff]
[ 0.361741] pci 0000:03:00.0: vgaarb: setting as boot VGA device (overriding previous)
[ 0.361743] pci 0000:03:00.0: vgaarb: bridge control possible
[ 0.361745] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
2) LS3A5000+LS7A2000 platform with four video cards
$ lspci | grep VGA
00:06.1 VGA compatible controller: Loongson Technology LLC Device 7a36 (rev 02)
01:00.0 VGA compatible controller: Silicon Motion, Inc. Device 0768 (rev 03)
04:00.0 VGA compatible controller: Device 0709:0001 (rev 01)
05:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Lexa PRO [Radeon 540/540X/550/550X / RX 540X/550/550X] (rev c7)
Before apply this patch:
[ 0.359345] pci 0000:00:06.1: vgaarb: setting as boot VGA device
[ 0.359347] pci 0000:00:06.1: vgaarb: bridge control possible
[ 0.359349] pci 0000:00:06.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.359358] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.359360] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.359364] pci 0000:04:00.0: vgaarb: bridge control possible
[ 0.359366] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.359369] pci 0000:05:00.0: vgaarb: bridge control possible
[ 0.359370] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.359373] vgaarb: loaded
[ 0.365852] pci 0000:00:06.1: Overriding boot device as 126F:768
[ 0.365855] pci 0000:00:06.1: Overriding boot device as 709:1
[ 0.365857] pci 0000:00:06.1: Overriding boot device as 1002:699F
[ 14.011380] amdgpu 0000:05:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
After apply this patch:
[ 0.357142] pci 0000:05:00.0: vgaarb: BAR 0 contains firmware FB
[ 0.359291] pci 0000:00:06.1: vgaarb: setting as boot VGA device
[ 0.359294] pci 0000:00:06.1: vgaarb: bridge control possible
[ 0.359296] pci 0000:00:06.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.359305] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.359307] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.359311] pci 0000:04:00.0: vgaarb: bridge control possible
[ 0.359312] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.359316] pci 0000:05:00.0: vgaarb: setting as boot VGA device (overriding previous)
[ 0.359318] pci 0000:05:00.0: vgaarb: bridge control possible
[ 0.359319] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.359321] vgaarb: loaded
[ 14.399907] amdgpu 0000:05:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
Again, the VRAM Bar do moves:
$ dmesg | grep 0000:05:00.0
[ 0.357076] pci 0000:05:00.0: [1002:699f] type 00 class 0x030000
[ 0.357093] pci 0000:05:00.0: reg 0x10: [mem 0xe0030000000-0xe003fffffff 64bit pref]
[ 0.357104] pci 0000:05:00.0: reg 0x18: [mem 0xe0040000000-0xe00401fffff 64bit pref]
[ 0.357112] pci 0000:05:00.0: reg 0x20: [io 0x40000-0x400ff]
[ 0.357120] pci 0000:05:00.0: reg 0x24: [mem 0xe0074300000-0xe007433ffff]
[ 0.357128] pci 0000:05:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.357142] pci 0000:05:00.0: vgaarb: BAR0 contains firmware FB
[ 0.357720] pci 0000:05:00.0: BAR 0: assigned [mem 0xe0060000000-0xe006fffffff 64bit pref]
[ 0.357728] pci 0000:05:00.0: BAR 2: assigned [mem 0xe0058000000-0xe00581fffff 64bit pref]
[ 0.357736] pci 0000:05:00.0: BAR 5: assigned [mem 0xe0072b00000-0xe0072b3ffff]
[ 0.357740] pci 0000:05:00.0: BAR 6: assigned [mem 0xe0072b40000-0xe0072b5ffff pref]
[ 0.357750] pci 0000:05:00.0: BAR 4: assigned [io 0x5000-0x50ff]
[ 0.359316] pci 0000:05:00.0: vgaarb: setting as boot VGA device (overriding previous)
[ 0.359318] pci 0000:05:00.0: vgaarb: bridge control possible
[ 0.359319] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
3) Mips (LS3A4000/LS7A1000 + SM750 + Radeon)
Loongson Mips have no UEFI GOP support, we test this patch by modifying the
screen_info manually.
$ lspci | grep VGA
04:00.0 VGA compatible controller: Silicon Motion, Inc. SM750 (rev a1)
05:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Oland [Radeon HD 8570 / R7 240/340 OEM] (rev 87)
$ dmesg | grep 04:00.0
pci 0000:04:00.0: [126f:0750] type 00 class 0x030000
pci 0000:04:00.0: reg 0x10: [mem 0x58000000-0x5bffffff pref]
pci 0000:04:00.0: reg 0x14: [mem 0x5f000000-0x5f1fffff]
pci 0000:04:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:04:00.0: BAR 0: assigned [mem 0x50000000-0x53ffffff pref]
pci 0000:04:00.0: BAR 1: assigned [mem 0x54000000-0x541fffff]
pci 0000:04:00.0: BAR 6: assigned [mem 0x54200000-0x5420ffff pref]
$ dmesg | grep 05:00.0
pci 0000:05:00.0: [1002:6611] type 00 class 0x030000
pci 0000:05:00.0: reg 0x10: [mem 0x40000000-0x4fffffff 64bit pref]
pci 0000:05:00.0: reg 0x18: [mem 0x5f300000-0x5f33ffff 64bit]
pci 0000:05:00.0: reg 0x20: [io 0x40000-0x400ff]
pci 0000:05:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:05:00.0: BAR 0: assigned [mem 0x40000000-0x4fffffff 64bit pref]
pci 0000:05:00.0: BAR 2: assigned [mem 0x5b300000-0x5b33ffff 64bit]
pci 0000:05:00.0: BAR 6: assigned [mem 0x5b340000-0x5b35ffff pref]
pci 0000:05:00.0: BAR 4: assigned [io 0x21000-0x210ff]
Specify the firmware fb at BAR 0 of SM750 by hardcode:
screen_info = (struct screen_info) {
.orig_video_isVGA = VIDEO_TYPE_EFI,
.lfb_base = 0x58000000,
.lfb_size = 1280 * 800 * 4 * 2,
};
$ dmesg | grep vgaarb
vgaarb: loaded
pci 0000:04:00.0: vgaarb: BAR 0 contains firmware FB
pci 0000:04:00.0: vgaarb: setting as boot VGA device
pci 0000:04:00.0: vgaarb: bridge control possible
pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:05:00.0: vgaarb: bridge control possible
pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
Specify the firmware fb at BAR 0 of ATI GPU by hardcode:
screen_info = (struct screen_info) {
.orig_video_isVGA = VIDEO_TYPE_EFI,
.lfb_base = 0x40000000,
.lfb_size = 1280 * 800 * 4 * 2,
};
$ dmesg | grep vgaarb
vgaarb: loaded
pci 0000:04:00.0: vgaarb: setting as boot VGA device
pci 0000:04:00.0: vgaarb: bridge control possible
pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:05:00.0: vgaarb: BAR 0 contains firmware FB
pci 0000:05:00.0: vgaarb: setting as boot VGA device (overriding previous)
pci 0000:05:00.0: vgaarb: bridge control possible
pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
radeon 0000:05:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
Signed-off-by: Sui Jingfeng <suijingfeng@xxxxxxxxxxx>
---
drivers/pci/vgaarb.c | 76 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 75 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/vgaarb.c b/drivers/pci/vgaarb.c
index 5a696078b382..7b6c3a772e91 100644
--- a/drivers/pci/vgaarb.c
+++ b/drivers/pci/vgaarb.c
@@ -60,7 +60,8 @@ static int vga_count, vga_decode_count;
static bool vga_arbiter_used;
static DEFINE_SPINLOCK(vga_lock);
static DECLARE_WAIT_QUEUE_HEAD(vga_wait_queue);
-
+/* The PCI(e) device who owns the firmware framebuffer */
+static struct pci_dev *pdev_boot_vga;
static const char *vga_iostate_to_str(unsigned int iostate)
{
@@ -571,6 +572,9 @@ static bool vga_is_firmware_default(struct pci_dev *pdev)
return true;
}
+#else
+ if (pdev_boot_vga && pdev_boot_vga == pdev)
+ return true;
#endif
return false;
}
@@ -1555,3 +1559,73 @@ static int __init vga_arb_device_init(void)
return rc;
}
subsys_initcall_sync(vga_arb_device_init);
+
+/*
+ * Get the physical address range that the firmware framebuffer occupies.
+ *
+ * The global screen_info is arch-specific, CONFIG_SYSFB is chosen as
+ * compile-time conditional to suppress linkage problems.
+ */
+static bool vga_arb_get_firmware_fb_range(resource_size_t *start,
+ resource_size_t *end)
+{
+ resource_size_t fb_start = 0;
+ resource_size_t fb_size = 0;
+ resource_size_t fb_end;
+
+#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_SYSFB)
+ fb_start = screen_info.lfb_base;
+ if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
+ fb_start |= (u64)screen_info.ext_lfb_base << 32;
+
+ fb_size = screen_info.lfb_size;
+#endif
+
+ /* No firmware framebuffer support */
+ if (!fb_start || !fb_size)
+ return false;
+
+ fb_end = fb_start + fb_size - 1;
+
+ *start = fb_start;
+ *end = fb_end;
+
+ return true;
+}
+
+/*
+ * Identify the PCI VGA device that contains the firmware framebuffer
+ */
+static void pci_boot_vga_finder(struct pci_dev *pdev)
+{
+ resource_size_t fb_start;
+ resource_size_t fb_end;
+ unsigned int i;
+
+ /* Already found the pdev which has firmware framebuffer ownership */
+ if (pdev_boot_vga)
+ return;
+
+ if (!vga_arb_get_firmware_fb_range(&fb_start, &fb_end))
+ return;
+
+ for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+ struct resource *res = &pdev->resource[i];
+
+ if (resource_type(res) != IORESOURCE_MEM)
+ continue;
+
+ if (!res->start || !res->end)
+ continue;
+
+ if (res->start <= fb_start && fb_end <= res->end) {
+ pdev_boot_vga = pdev;
+
+ vgaarb_info(&pdev->dev,
+ "BAR %d contains firmware FB\n", i);
+ break;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA,
+ 8, pci_boot_vga_finder);
--
2.34.1