Re: [PATCH v3 0/3] leds: aw2013: Document interrupt and pull-up supply

From: Nikita Travkin
Date: Wed Aug 16 2023 - 01:42:58 EST


Stephan Gerhold писал(а) 15.08.2023 22:21:
> AW2013 has an optional interrupt pin "INTN" which is used to report
> completion of started operations (e.g. power up or LED breath effects).
> The driver does not use it (yet) but it should be already described for
> completeness inside the DT schema.
>
> Since the interrupt and I2C lines operate in open drain low active mode
> a pull-up supply is needed for correct operation. Unfortunately there
> is no ideal place to describe it in the DT: The pull-up needed for the
> I2C lines could be described on the I2C bus. However, the pull-up
> needed for the interrupt line belongs neither directly to the interrupt
> controller nor to AW2013. Since the AW2013 driver will be typically in
> control of the power management and interrupt masking it makes more
> sense to describe it inside the AW2013 device tree node.
>

Oh indeed, seems like even on the hardware I was initially targeting,
the pull is tied to a regulator, I probably missed it because it was
always on. Thank you both for adding that and fixing up the bindings!

Reviewed-by: Nikita Travkin <nikita@xxxxxxx>

Nikita

> Changes in v3:
> - Rewrite commit messages based on discussion on v2
> - Also document missing interrupt in DT schema (new patch)
>
> Discussion on v2:
> https://lore.kernel.org/linux-leds/20230321220825.GA1685482-robh@xxxxxxxxxx/
>
> Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
> ---
> Lin, Meng-Bo (1):
> leds: aw2013: Enable pull-up supply for interrupt and I2C
>
> Stephan Gerhold (2):
> dt-bindings: leds: aw2013: Document interrupt
> dt-bindings: leds: Document pull-up supply for interrupt and I2C
>
> .../devicetree/bindings/leds/leds-aw2013.yaml | 13 ++++++++
> drivers/leds/leds-aw2013.c | 36 +++++++++++++---------
> 2 files changed, 35 insertions(+), 14 deletions(-)
> ---
> base-commit: 841165267827955bb3295b066cb6a906ba9265c0
> change-id: 20230815-aw2013-vio-92a4566c5863
>
> Best regards,