Re: [PATCH v1 3/3] PCI: qcom: Add OPP suuport for speed based performance state of RPMH

[Pavan Kondeti]

On Tue, Aug 15, 2023 at 05:56:48PM +0530, Krishna chaitanya chundru wrote:
> Before link training vote for the maximum performance state of RPMH
> and once the link is up, vote for the performance state based upon
> the link speed.
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 61 ++++++++++++++++++++++++++++++++++
>  1 file changed, 61 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 7a87a47..e29a986 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -22,6 +22,7 @@
>  #include <linux/of_device.h>
>  #include <linux/of_gpio.h>
>  #include <linux/pci.h>
> +#include <linux/pm_opp.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/platform_device.h>
>  #include <linux/phy/pcie.h>
> @@ -1357,6 +1358,51 @@ static int qcom_pcie_icc_init(struct qcom_pcie *pcie)
>  	return 0;
>  }
>  
> +static void qcom_pcie_opp_update(struct qcom_pcie *pcie)
> +{
> +	struct dw_pcie *pci = pcie->pci;
> +	struct dev_pm_opp *opp;
> +	u32 offset, status;
> +	uint32_t freq;
> +	int speed;
> +	int ret = 0;
> +
> +	offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> +	status = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
> +
> +	/* Only update constraints if link is up. */
> +	if (!(status & PCI_EXP_LNKSTA_DLLLA))
> +		return;
> +
> +	speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, status);
> +
> +	switch (speed) {
> +	case 1:
> +		freq = 2500000;
> +		break;
> +	case 2:
> +		freq = 5000000;
> +		break;
> +	case 3:
> +		freq = 8000000;
> +		break;
> +	default:
> +		WARN_ON_ONCE(1);
> +		fallthrough;
> +	case 4:
> +		freq = 16000000;
> +		break;
> +	}
> +
> +	opp = dev_pm_opp_find_freq_exact(pci->dev, freq, true);
> +
> +	if (!IS_ERR(opp)) {
> +		ret = dev_pm_opp_get_voltage(opp);
> +		dev_pm_opp_put(opp);
> +	}
> +

Where are we setting the OPP here?

> +}
> +
>  static void qcom_pcie_icc_update(struct qcom_pcie *pcie)
>  {
>  	struct dw_pcie *pci = pcie->pci;
> @@ -1439,8 +1485,10 @@ static void qcom_pcie_init_debugfs(struct qcom_pcie *pcie)
>  static int qcom_pcie_probe(struct platform_device *pdev)
>  {
>  	const struct qcom_pcie_cfg *pcie_cfg;
> +	unsigned long max_freq = INT_MAX;
>  	struct device *dev = &pdev->dev;
>  	struct qcom_pcie *pcie;
> +	struct dev_pm_opp *opp;
>  	struct dw_pcie_rp *pp;
>  	struct resource *res;
>  	struct dw_pcie *pci;
> @@ -1511,6 +1559,17 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto err_pm_runtime_put;
>  
> +	/* OPP table is optional */
> +	ret = devm_pm_opp_of_add_table(dev);
> +	if (ret && ret != -ENODEV) {
> +		dev_err(dev, "Invalid OPP table in Device tree\n");
> +		goto err_pm_runtime_put;
> +	}
> +
> +	opp = dev_pm_opp_find_freq_floor(dev, &max_freq);
> +	if (!IS_ERR(opp))
> +		dev_pm_opp_put(opp);
> +

This OPP (corresponding to max freq) is not used, so how are we voting
for max perf state during probe?

>  	ret = pcie->cfg->ops->get_resources(pcie);
>  	if (ret)
>  		goto err_pm_runtime_put;
> @@ -1531,6 +1590,8 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  
>  	qcom_pcie_icc_update(pcie);
>  
> +	qcom_pcie_opp_update(pcie);
> +

commit description says, OPP voting is done as per the link speed after
probe? I don't see any calls to qcom_pcie_opp_update() outside probe.

>  	if (pcie->mhi)
>  		qcom_pcie_init_debugfs(pcie);
>  
> 

Thanks,
Pavan