Re: [PATCH V4 2/2] rcu: Update jiffies in rcu_cpu_stall_reset()

From: Huacai Chen
Date: Wed Aug 16 2023 - 08:30:09 EST

Hi, Qiang,

On Wed, Aug 16, 2023 at 6:06 PM Z qiang <qiang.zhang1211@xxxxxxxxx> wrote:
>
> >
> > Hi, Qiang,
> >
> > On Wed, Aug 16, 2023 at 1:09 PM Z qiang <qiang.zhang1211@xxxxxxxxx> wrote:
> > >
> > > >
> > > > Hi, Qiang,
> > > >
> > > > On Wed, Aug 16, 2023 at 11:16 AM Z qiang <qiang.zhang1211@xxxxxxxxx> wrote:
> > > > >
> > > > > >
> > > > > > Hi, Paul,
> > > > > >
> > > > > > On Tue, Aug 15, 2023 at 12:15 AM Paul E. McKenney <paulmck@xxxxxxxxxx> wrote:
> > > > > > >
> > > > > > > On Mon, Aug 14, 2023 at 10:00:45AM +0800, Huacai Chen wrote:
> > > > > > > > The KGDB initial breakpoint gets an rcu stall warning after commit
> > > > > > > > a80be428fbc1f1f3bc9ed924 ("rcu: Do not disable GP stall detection in
> > > > > > > > rcu_cpu_stall_reset()").
> > > > > > > >
> > > > > > > > [ 53.452051] rcu: INFO: rcu_preempt self-detected stall on CPU
> > > > > > > > [ 53.487950] rcu: 3-...0: (1 ticks this GP) idle=0e2c/1/0x4000000000000000 softirq=375/375 fqs=8
> > > > > > > > [ 53.528243] rcu: (t=12297 jiffies g=-995 q=1 ncpus=4)
> > > > > > > > [ 53.564840] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc2+ #4848
> > > > > > > > [ 53.603005] Hardware name: Loongson Loongson-3A5000-HV-7A2000-1w-V0.1-CRB/Loongson-LS3A5000-7A2000-1w-CRB-V1.21, BIOS Loongson-UDK2018-V2.0.05099-beta8 08
> > > > > > > > [ 53.682062] pc 9000000000332100 ra 90000000003320f4 tp 90000001000a0000 sp 90000001000a3710
> > > > > > > > [ 53.724934] a0 9000000001d4b488 a1 0000000000000000 a2 0000000000000001 a3 0000000000000000
> > > > > > > > [ 53.768179] a4 9000000001d526c8 a5 90000001000a38f0 a6 000000000000002c a7 0000000000000000
> > > > > > > > [ 53.810751] t0 00000000000002b0 t1 0000000000000004 t2 900000000131c9c0 t3 fffffffffffffffa
> > > > > > > > [ 53.853249] t4 0000000000000080 t5 90000001002ac190 t6 0000000000000004 t7 9000000001912d58
> > > > > > > > [ 53.895684] t8 0000000000000000 u0 90000000013141a0 s9 0000000000000028 s0 9000000001d512f0
> > > > > > > > [ 53.937633] s1 9000000001d51278 s2 90000001000a3798 s3 90000000019fc410 s4 9000000001d4b488
> > > > > > > > [ 53.979486] s5 9000000001d512f0 s6 90000000013141a0 s7 0000000000000078 s8 9000000001d4b450
> > > > > > > > [ 54.021175] ra: 90000000003320f4 kgdb_cpu_enter+0x534/0x640
> > > > > > > > [ 54.060150] ERA: 9000000000332100 kgdb_cpu_enter+0x540/0x640
> > > > > > > > [ 54.098347] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
> > > > > > > > [ 54.136621] PRMD: 0000000c (PPLV0 +PIE +PWE)
> > > > > > > > [ 54.172192] EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
> > > > > > > > [ 54.207838] ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
> > > > > > > > [ 54.242503] ESTAT: 00000800 [INT] (IS=11 ECode=0 EsubCode=0)
> > > > > > > > [ 54.277996] PRID: 0014c011 (Loongson-64bit, Loongson-3A5000-HV)
> > > > > > > > [ 54.313544] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc2+ #4848
> > > > > > > > [ 54.430170] Stack : 0072617764726148 0000000000000000 9000000000223504 90000001000a0000
> > > > > > > > [ 54.472308] 9000000100073a90 9000000100073a98 0000000000000000 9000000100073bd8
> > > > > > > > [ 54.514413] 9000000100073bd0 9000000100073bd0 9000000100073a00 0000000000000001
> > > > > > > > [ 54.556018] 0000000000000001 9000000100073a98 99828271f24e961a 90000001002810c0
> > > > > > > > [ 54.596924] 0000000000000001 0000000000010003 0000000000000000 0000000000000001
> > > > > > > > [ 54.637115] ffff8000337cdb80 0000000000000001 0000000006360000 900000000131c9c0
> > > > > > > > [ 54.677049] 0000000000000000 0000000000000000 90000000017b4c98 9000000001912000
> > > > > > > > [ 54.716394] 9000000001912f68 9000000001913000 9000000001912f70 00000000000002b0
> > > > > > > > [ 54.754880] 90000000014a8840 0000000000000000 900000000022351c 0000000000000000
> > > > > > > > [ 54.792372] 00000000000002b0 000000000000000c 0000000000000000 0000000000071c1c
> > > > > > > > [ 54.829302] ...
> > > > > > > > [ 54.859163] Call Trace:
> > > > > > > > [ 54.859165] [<900000000022351c>] show_stack+0x5c/0x180
> > > > > > > > [ 54.918298] [<90000000012f6100>] dump_stack_lvl+0x60/0x88
> > > > > > > > [ 54.949251] [<90000000012dd5d8>] rcu_dump_cpu_stacks+0xf0/0x148
> > > > > > > > [ 54.981116] [<90000000002d2fb8>] rcu_sched_clock_irq+0xb78/0xe60
> > > > > > > > [ 55.012744] [<90000000002e47cc>] update_process_times+0x6c/0xc0
> > > > > > > > [ 55.044169] [<90000000002f65d4>] tick_sched_timer+0x54/0x100
> > > > > > > > [ 55.075488] [<90000000002e5174>] __hrtimer_run_queues+0x154/0x240
> > > > > > > > [ 55.107347] [<90000000002e6288>] hrtimer_interrupt+0x108/0x2a0
> > > > > > > > [ 55.139112] [<9000000000226418>] constant_timer_interrupt+0x38/0x60
> > > > > > > > [ 55.170749] [<90000000002b3010>] __handle_irq_event_percpu+0x50/0x160
> > > > > > > > [ 55.203141] [<90000000002b3138>] handle_irq_event_percpu+0x18/0x80
> > > > > > > > [ 55.235064] [<90000000002b9d54>] handle_percpu_irq+0x54/0xa0
> > > > > > > > [ 55.266241] [<90000000002b2168>] generic_handle_domain_irq+0x28/0x40
> > > > > > > > [ 55.298466] [<9000000000aba95c>] handle_cpu_irq+0x5c/0xa0
> > > > > > > > [ 55.329749] [<90000000012f7270>] handle_loongarch_irq+0x30/0x60
> > > > > > > > [ 55.361476] [<90000000012f733c>] do_vint+0x9c/0x100
> > > > > > > > [ 55.391737] [<9000000000332100>] kgdb_cpu_enter+0x540/0x640
> > > > > > > > [ 55.422440] [<9000000000332b64>] kgdb_handle_exception+0x104/0x180
> > > > > > > > [ 55.452911] [<9000000000232478>] kgdb_loongarch_notify+0x38/0xa0
> > > > > > > > [ 55.481964] [<900000000026b4d4>] notify_die+0x94/0x100
> > > > > > > > [ 55.509184] [<90000000012f685c>] do_bp+0x21c/0x340
> > > > > > > > [ 55.562475] [<90000000003315b8>] kgdb_compiled_break+0x0/0x28
> > > > > > > > [ 55.590319] [<9000000000332e80>] kgdb_register_io_module+0x160/0x1c0
> > > > > > > > [ 55.618901] [<9000000000c0f514>] configure_kgdboc+0x154/0x1c0
> > > > > > > > [ 55.647034] [<9000000000c0f5e0>] kgdboc_probe+0x60/0x80
> > > > > > > > [ 55.674647] [<9000000000c96da8>] platform_probe+0x68/0x100
> > > > > > > > [ 55.702613] [<9000000000c938e0>] really_probe+0xc0/0x340
> > > > > > > > [ 55.730528] [<9000000000c93be4>] __driver_probe_device+0x84/0x140
> > > > > > > > [ 55.759615] [<9000000000c93cdc>] driver_probe_device+0x3c/0x120
> > > > > > > > [ 55.787990] [<9000000000c93e8c>] __device_attach_driver+0xcc/0x160
> > > > > > > > [ 55.817145] [<9000000000c91290>] bus_for_each_drv+0x90/0x100
> > > > > > > > [ 55.845654] [<9000000000c94328>] __device_attach+0xa8/0x1a0
> > > > > > > > [ 55.874145] [<9000000000c925f0>] bus_probe_device+0xb0/0xe0
> > > > > > > > [ 55.902572] [<9000000000c8ec7c>] device_add+0x65c/0x860
> > > > > > > > [ 55.930635] [<9000000000c96704>] platform_device_add+0x124/0x2c0
> > > > > > > > [ 55.959669] [<9000000001452b38>] init_kgdboc+0x58/0xa0
> > > > > > > > [ 55.987677] [<900000000022015c>] do_one_initcall+0x7c/0x1e0
> > > > > > > > [ 56.016134] [<9000000001420f1c>] kernel_init_freeable+0x22c/0x2a0
> > > > > > > > [ 56.045128] [<90000000012f923c>] kernel_init+0x20/0x124
> > > > > > > >
> > > > > > > > Currently rcu_cpu_stall_reset() set rcu_state.jiffies_stall to one check
> > > > > > > > period later, i.e. jiffies + rcu_jiffies_till_stall_check(). But jiffies
> > > > > > > > is only updated in the timer interrupt, so when kgdb_cpu_enter() begins
> > > > > > > > to run there may already be nearly one rcu check period after jiffies.
> > > > > > > > Since all interrupts are disabled during kgdb_cpu_enter(), jiffies will
> > > > > > > > not be updated. When kgdb_cpu_enter() returns, rcu_state.jiffies_stall
> > > > > > > > maybe already gets timeout.
> > > > > > > >
> > > > > > > > We can set rcu_state.jiffies_stall to two rcu check periods later, e.g.
> > > > > > > > jiffies + (rcu_jiffies_till_stall_check() * 2) in rcu_cpu_stall_reset()
> > > > > > > > to avoid this problem. But this isn't a complete solution because kgdb
> > > > > > > > may take a very long time in irq disabled context.
> > > > > > > >
> > > > > > > > Instead, update jiffies at the beginning of rcu_cpu_stall_reset() can
> > > > > > > > solve all kinds of problems.
> > > > > > >
> > > > > > > Would it make sense for there to be a kgdb_cpu_exit()? In that case,
> > > > > > > the stalls could simply be suppressed at the beginning of the debug
> > > > > > > session and re-enabled upon exit, as is currently done for sysrq output
> > > > > > > via rcu_sysrq_start() and rcu_sysrq_end().
> > > > > > Thank you for your advice, but that doesn't help. Because
> > > > > > rcu_sysrq_start() and rcu_sysrq_end() try to suppress the warnings
> > > > > > during sysrq, but kgdb already has no warnings during kgdb_cpu_enter()
> > > > > > since it is executed in irq disabled context. Instead, this patch
> > > > > > wants to suppress the warnings *after* kgdb_cpu_enter() due to a very
> > > > > > old jiffies value.
> > > > > >
> > > > >
> > > > > Hello, Huacai
> > > > >
> > > > > Is it possible to set the rcu_cpu_stall_suppress is true in
> > > > > dbg_touch_watchdogs()
> > > > > and reset the rcu_cpu_stall_suppress at the beginning and end of the
> > > > > RCU grace period?
> > > > This is possible but not the best: 1, kgdb is not the only caller of
> > > > rcu_cpu_stall_reset(); 2, it is difficult to find the "end" to reset
> > > > rcu_cpu_stall_suppress.
> > > >
> > >
> > > You can replace rcu_state.jiffies_stall update by setting rcu_cpu_stall_suppress
> > > in rcu_cpu_stall_reset(), and reset rcu_cpu_stall_suppress in rcu_gp_init() and
> > > rcu_gp_cleanup().
> > What's the advantage compared with updating jiffies? Updating jiffies
> > seems more straight forward.
> >
>
> In do_update_jiffies_64(), need to acquire jiffies_lock raw spinlock,
> like you said, kgdb is not the only caller of rcu_cpu_stall_reset(),
> the rcu_cpu_stall_reset() maybe invoke in NMI (arch/x86/platform/uv/uv_nmi.c)
Reset rcu_cpu_stall_suppress in rcu_gp_init()/rcu_gp_cleanup() is
still not so good to me, because it does a useless operation in most
cases. Moreover, the rcu core is refactored again and again, something
may be changed in future.

If do_update_jiffies_64() cannot be used in NMI context, can we
consider my old method [1]?
https://lore.kernel.org/rcu/CAAhV-H7j9Y=VvRLm8thLw-EX1PGqBA9YfT4G1AN7ucYS=iP+DQ@xxxxxxxxxxxxxx/T/#t

Of course we should set rcu_state.jiffies_stall large enough, so we
can do like this:

void rcu_cpu_stall_reset(void)
{
WRITE_ONCE(rcu_state.jiffies_stall,
- jiffies + rcu_jiffies_till_stall_check());
+ jiffies + 300 * HZ);
}

300s is the largest timeout value, and I think 300s is enough here in practice.

Huacai

>
> Thanks
> Zqiang
>
>
> > Huacai
> >
> > >
> > > Thanks
> > > Zqiang
> > >
> > > >
> > > > > or set rcupdate.rcu_cpu_stall_suppress_at_boot=1 in bootargs can
> > > > > suppress RCU stall
> > > > > in booting.
> > > > This is also possible, but it suppresses all kinds of stall warnings,
> > > > which is not what we want.
> > > >
> > > > Huacai
> > > > >
> > > > >
> > > > > Thanks
> > > > > Zqiang
> > > > >
> > > > >
> > > > > >
> > > > > > Huacai
> > > > > >
> > > > > > >
> > > > > > > Thanx, Paul
> > > > > > >
> > > > > > > > Cc: stable@xxxxxxxxxxxxxxx
> > > > > > > > Fixes: a80be428fbc1f1f3bc9ed924 ("rcu: Do not disable GP stall detection in rcu_cpu_stall_reset()")
> > > > > > > > Reported-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
> > > > > > > > Signed-off-by: Huacai Chen <chenhuacai@xxxxxxxxxxx>
> > > > > > > > ---
> > > > > > > > kernel/rcu/tree_stall.h | 1 +
> > > > > > > > 1 file changed, 1 insertion(+)
> > > > > > > >
> > > > > > > > diff --git a/kernel/rcu/tree_stall.h b/kernel/rcu/tree_stall.h
> > > > > > > > index b10b8349bb2a..1c7b540985bf 100644
> > > > > > > > --- a/kernel/rcu/tree_stall.h
> > > > > > > > +++ b/kernel/rcu/tree_stall.h
> > > > > > > > @@ -153,6 +153,7 @@ static void panic_on_rcu_stall(void)
> > > > > > > > */
> > > > > > > > void rcu_cpu_stall_reset(void)
> > > > > > > > {
> > > > > > > > + do_update_jiffies_64(ktime_get());
> > > > > > > > WRITE_ONCE(rcu_state.jiffies_stall,
> > > > > > > > jiffies + rcu_jiffies_till_stall_check());
> > > > > > > > }
> > > > > > > > --
> > > > > > > > 2.39.3
> > > > > > > >