Hello Mike,
Sorry for the very late review, there is a small change that is needed:
On 02/05/2023 07:54:58+0200, Mike Looijmans wrote:
When wakeup-source is set in the devicetree, set up the device for
using the output as interrupt instead of clock. This is similar to
how other RTC devices handle this.
This allows the clock chip to turn on the board when wired to do
so in hardware.
Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
---
drivers/rtc/rtc-pcf85363.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/rtc/rtc-pcf85363.c b/drivers/rtc/rtc-pcf85363.c
index 8958eadf1c3e..b1543bcdc530 100644
--- a/drivers/rtc/rtc-pcf85363.c
+++ b/drivers/rtc/rtc-pcf85363.c
@@ -434,23 +434,26 @@ static int pcf85363_probe(struct i2c_client *client)
pcf85363->rtc->range_max = RTC_TIMESTAMP_END_2099;
clear_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features);
+ if (client->irq > 0 || device_property_read_bool(&client->dev,
+ "wakeup-source")) {
+ regmap_write(pcf85363->regmap, CTRL_FLAGS, 0);
+ regmap_update_bits(pcf85363->regmap, CTRL_PIN_IO,
+ PIN_IO_INTA_OUT, PIN_IO_INTAPM);
+ device_init_wakeup(&client->dev, true);
+ set_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features);
This should not be done when devm_request_threaded_irq fails.
+ }
+
if (client->irq > 0) {
unsigned long irqflags = IRQF_TRIGGER_LOW;
if (dev_fwnode(&client->dev))
irqflags = 0;
-
- regmap_write(pcf85363->regmap, CTRL_FLAGS, 0);
- regmap_update_bits(pcf85363->regmap, CTRL_PIN_IO,
- PIN_IO_INTA_OUT, PIN_IO_INTAPM);
ret = devm_request_threaded_irq(&client->dev, client->irq,
NULL, pcf85363_rtc_handle_irq,
irqflags | IRQF_ONESHOT,
"pcf85363", client);
if (ret)
- dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
- else
- set_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features);
+ dev_warn(&client->dev, "unable to request IRQ, alarm not functional\n");
}
ret = devm_rtc_register_device(pcf85363->rtc);
--
2.17.1