[PATCH 04/10] drm/IB/hfi1: Use RMW accessors for changing LNKCTL2

From: Ilpo Järvinen
Date: Thu Aug 17 2023 - 08:18:38 EST


Don't assume that only the driver would be accessing LNKCTL2. In the
case of upstream (parent), the driver does not even own the device it's
changing the registers for.

Use RMW capability accessors which do proper locking to avoid losing
concurrent updates to the register value. This change is also useful as
a cleanup.

Suggested-by: Lukas Wunner <lukas@xxxxxxxxx>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
drivers/infiniband/hw/hfi1/pcie.c | 30 ++++++++----------------------
1 file changed, 8 insertions(+), 22 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
index 08732e1ac966..60a177f52eb5 100644
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -1212,14 +1212,11 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd)
(u32)lnkctl2);
/* only write to parent if target is not as high as ours */
if ((lnkctl2 & PCI_EXP_LNKCTL2_TLS) < target_vector) {
- lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS;
- lnkctl2 |= target_vector;
- dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__,
- (u32)lnkctl2);
- ret = pcie_capability_write_word(parent,
- PCI_EXP_LNKCTL2, lnkctl2);
+ ret = pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL2,
+ PCI_EXP_LNKCTL2_TLS,
+ target_vector);
if (ret) {
- dd_dev_err(dd, "Unable to write to PCI config\n");
+ dd_dev_err(dd, "Unable to change PCI target speed\n");
return_error = 1;
goto done;
}
@@ -1228,22 +1225,11 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd)
}

dd_dev_info(dd, "%s: setting target link speed\n", __func__);
- ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL2, &lnkctl2);
+ ret = pcie_capability_clear_and_set_word(dd->pcidev, PCI_EXP_LNKCTL2,
+ PCI_EXP_LNKCTL2_TLS,
+ target_vector);
if (ret) {
- dd_dev_err(dd, "Unable to read from PCI config\n");
- return_error = 1;
- goto done;
- }
-
- dd_dev_info(dd, "%s: ..old link control2: 0x%x\n", __func__,
- (u32)lnkctl2);
- lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS;
- lnkctl2 |= target_vector;
- dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__,
- (u32)lnkctl2);
- ret = pcie_capability_write_word(dd->pcidev, PCI_EXP_LNKCTL2, lnkctl2);
- if (ret) {
- dd_dev_err(dd, "Unable to write to PCI config\n");
+ dd_dev_err(dd, "Unable to change PCI target speed\n");
return_error = 1;
goto done;
}
--
2.30.2