[PATCH blktests v2 1/3] nvme/{033,034,035,036}: use default subsysnqn variable directly

[Daniel Wagner]

There is no need to introduce an extra local variable when it
uses the default subsysnqn anyway.

Signed-off-by: Daniel Wagner <dwagner@xxxxxxx>
---
 tests/nvme/033 |  9 ++++-----
 tests/nvme/034 |  9 ++++-----
 tests/nvme/035 |  9 ++++-----
 tests/nvme/036 | 11 +++++------
 4 files changed, 17 insertions(+), 21 deletions(-)

diff --git a/tests/nvme/033 b/tests/nvme/033
index 46a520ae01fa..d924883460c2 100755
--- a/tests/nvme/033
+++ b/tests/nvme/033
@@ -49,18 +49,17 @@ test_device() {
 
 	_setup_nvmet
 
-	local subsys="${def_subsysnqn}"
 	local nsdev
 	local port
 
-	port=$(_nvmet_passthru_target_setup "${subsys}")
+	port=$(_nvmet_passthru_target_setup "${def_subsysnqn}")
 
-	nsdev=$(_nvmet_passthru_target_connect "${nvme_trtype}" "${subsys}")
+	nsdev=$(_nvmet_passthru_target_connect "${nvme_trtype}" "${def_subsysnqn}")
 
 	compare_dev_info "${nsdev}"
 
-	_nvme_disconnect_subsys "${subsys}"
-	_nvmet_passthru_target_cleanup "${port}" "${subsys}"
+	_nvme_disconnect_subsys "${def_subsysnqn}"
+	_nvmet_passthru_target_cleanup "${port}" "${def_subsysnqn}"
 
 	echo "Test complete"
 }
diff --git a/tests/nvme/034 b/tests/nvme/034
index 3c65d92cbaea..e79eef5e756d 100755
--- a/tests/nvme/034
+++ b/tests/nvme/034
@@ -19,18 +19,17 @@ test_device() {
 
 	_setup_nvmet
 
-	local subsys="${def_subsysnqn}"
 	local ctrldev
 	local nsdev
 	local port
 
-	port=$(_nvmet_passthru_target_setup "${subsys}")
-	nsdev=$(_nvmet_passthru_target_connect "${nvme_trtype}" "${subsys}")
+	port=$(_nvmet_passthru_target_setup "${def_subsysnqn}")
+	nsdev=$(_nvmet_passthru_target_connect "${nvme_trtype}" "${def_subsysnqn}")
 
 	_run_fio_verify_io --size="${nvme_img_size}" --filename="${nsdev}"
 
-	_nvme_disconnect_subsys "${subsys}"
-	_nvmet_passthru_target_cleanup "${port}" "${subsys}"
+	_nvme_disconnect_subsys "${def_subsysnqn}"
+	_nvmet_passthru_target_cleanup "${port}" "${def_subsysnqn}"
 
 	echo "Test complete"
 }
diff --git a/tests/nvme/035 b/tests/nvme/035
index c705d9cf25a4..f0dfc92ceeea 100755
--- a/tests/nvme/035
+++ b/tests/nvme/035
@@ -25,18 +25,17 @@ test_device() {
 
 	_setup_nvmet
 
-	local subsys="${def_subsysnqn}"
 	local ctrldev
 	local nsdev
 	local port
 
-	port=$(_nvmet_passthru_target_setup "${subsys}")
-	nsdev=$(_nvmet_passthru_target_connect "${nvme_trtype}" "${subsys}")
+	port=$(_nvmet_passthru_target_setup "${def_subsysnqn}")
+	nsdev=$(_nvmet_passthru_target_connect "${nvme_trtype}" "${def_subsysnqn}")
 
 	_xfs_run_fio_verify_io "${nsdev}" "${nvme_img_size}"
 
-	_nvme_disconnect_subsys "${subsys}"
-	_nvmet_passthru_target_cleanup "${port}" "${subsys}"
+	_nvme_disconnect_subsys "${def_subsysnqn}"
+	_nvmet_passthru_target_cleanup "${port}" "${def_subsysnqn}"
 
 	echo "Test complete"
 }
diff --git a/tests/nvme/036 b/tests/nvme/036
index 2e933cc41928..61b9e2309da7 100755
--- a/tests/nvme/036
+++ b/tests/nvme/036
@@ -18,21 +18,20 @@ test_device() {
 
 	_setup_nvmet
 
-	local subsys="${def_subsysnqn}"
 	local ctrldev
 	local port
 
-	port=$(_nvmet_passthru_target_setup "${subsys}")
-	nsdev=$(_nvmet_passthru_target_connect "${nvme_trtype}" "${subsys}")
+	port=$(_nvmet_passthru_target_setup "${def_subsysnqn}")
+	nsdev=$(_nvmet_passthru_target_connect "${nvme_trtype}" "${def_subsysnqn}")
 
-	ctrldev=$(_find_nvme_dev "${subsys}")
+	ctrldev=$(_find_nvme_dev "${def_subsysnqn}")
 
 	if ! nvme reset "/dev/${ctrldev}" >> "$FULL" 2>&1; then
 		echo "ERROR: reset failed"
 	fi
 
-	_nvme_disconnect_subsys "${subsys}"
-	_nvmet_passthru_target_cleanup "${port}" "${subsys}"
+	_nvme_disconnect_subsys "${def_subsysnqn}"
+	_nvmet_passthru_target_cleanup "${port}" "${def_subsysnqn}"
 
 	echo "Test complete"
 }
-- 
2.41.0