Re: REGRESSION WITH BISECT: v6.5-rc6 TPM patch breaks S3 on some Intel systems
From: Mario Limonciello
Date: Fri Aug 18 2023 - 13:58:16 EST
On 8/18/2023 12:53, Jarkko Sakkinen wrote:
On Fri Aug 18, 2023 at 8:21 PM EEST, Mario Limonciello wrote:
On 8/18/2023 12:00, Jarkko Sakkinen wrote:
On Fri Aug 18, 2023 at 4:58 AM EEST, Limonciello, Mario wrote:
On 8/17/2023 5:33 PM, Jarkko Sakkinen wrote:
On Fri Aug 18, 2023 at 1:25 AM EEST, Todd Brandt wrote:
On Fri, 2023-08-18 at 00:47 +0300, Jarkko Sakkinen wrote:
On Fri Aug 18, 2023 at 12:09 AM EEST, Todd Brandt wrote:
While testing S3 on 6.5.0-rc6 we've found that 5 systems are seeing
a
crash and reboot situation when S3 suspend is initiated. To
reproduce
it, this call is all that's required "sudo sleepgraph -m mem
-rtcwake
15".
1. Are there logs available?
2. Is this the test case: https://pypi.org/project/sleepgraph/ (never
used it before).
There are no dmesg logs because the S3 crash wipes them out. Sleepgraph
isn't actually necessary to activate it, just an S3 suspend "echo mem >
/sys/power/state".
So far it appears to only have affected test systems, not production
hardware, and none of them have TPM chips, so I'm beginning to wonder
if this patch just inadvertently activated a bug somewhere else in the
kernel that happens to affect test hardware.
I'll continue to debug it, this isn't an emergency as so far I haven't
seen it in production hardware.
OK, I'll still see if I could reproduce it just in case.
BR, Jarkko
I'd like to better understand what kind of TPM initialization path has
run. Does the machine have some sort of TPM that failed to fully
initialize perhaps?
If you can't share a full bootup dmesg, can you at least share
# dmesg | grep -i tpm
It would be more useful perhaps to get full dmesg output after power on
and before going into suspend.
Also ftrace filter could be added to the kernel command-line:
ftrace=function ftrace_filter=tpm*
After bootup:
mount -t tracefs nodev /sys/kernel/tracing
cat /sys/kernel/tracing/trace
BR, Jarkko
Todd and I have gone back and forth a little bit on the bugzilla
(https://bugzilla.kernel.org/show_bug.cgi?id=217804), and it seems that
this isn't an S3 problem - it's a probing problem.
[ 1.132521] tpm_crb: probe of INTC6001:00 failed with error 378
That error 378 specifically matches TPM2_CC_GET_CAPABILITY, which is the
same command that was being requested. This leads me to believe the TPM
isn't ready at the time of probing.
In this case one solution is we could potentially ignore failures for
that tpm2_get_tpm_pt() call, but I think we should first understand why
it doesn't work at probing time for this TPM to ensure the actual quirk
isn't built on a house of cards.
Given that there is nothing known broken (at the moment) in production,
I think the following might be a reasonable change.
BR, Jarkko
Yeah that would prevent it.
Here's a simpler change that I think should work too though:
diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
index 9eb1a18590123..b0e9931fe436c 100644
--- a/drivers/char/tpm/tpm_crb.c
+++ b/drivers/char/tpm/tpm_crb.c
@@ -472,8 +472,7 @@ static int crb_check_flags(struct tpm_chip *chip)
if (ret)
return ret;
- ret = tpm2_get_tpm_pt(chip, TPM2_PT_MANUFACTURER, &val, NULL);
- if (ret)
+ if (tpm2_get_tpm_pt(chip, TPM2_PT_MANUFACTURER, &val, NULL))
goto release;
if (val == 0x414D4400U /* AMD */)
I think Todd needs to check whether TPM works with that or not though.