Re: [PATCH v4 2/2] regulator: dt-bindings: Add Awinic AW37503

[Krzysztof Kozlowski]

On 16/08/2023 10:17, like@xxxxxxxxxx wrote:
> From: Alec Li <like@xxxxxxxxxx>
> 
> Add aw37503 regulator device-tree binding documentation.
> 
> Signed-off-by: Alec Li <like@xxxxxxxxxx>
> ---
>  .../bindings/regulator/awinic,aw37503.yaml    | 80 +++++++++++++++++++
>  1 file changed, 80 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml
> 
> diff --git a/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml b/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml
> new file mode 100644
> index 000000000000..65a891505808
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/awinic,aw37503.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Awinic AW37503 Voltage Regulator
> +
> +maintainers:
> +  - Alec Li <like@xxxxxxxxxx>
> +
> +description: |

Do not need '|' unless you need to preserve formatting.

> +  The AW37503 are dual voltage regulator, designed to support positive/negative
> +  supply for driving TFT-LCD panels. It support software-configurable output
> +  switching and monitoring. The output voltages can be programmed via an I2C
> +  compatible interface.
> +
> +properties:
> +  compatible:
> +    const: awinic,aw37503
> +
> +  reg:
> +    maxItems: 1
> +
> +patternProperties:
> +  "^out[pn]$":
> +    type: object
> +    $ref: regulator.yaml#
> +    unevaluatedProperties: false
> +    description: |

Do not need '|' unless you need to preserve formatting.

> +      Properties for single regulator.
> +
> +    properties:
> +      regulator-name: true
> +      regulator-always-on: true
> +      regulator-boot-on: true

Drop all three above. They are not needed, because you use
unevaluatedProperties:false.

> +      enable-gpio:

I believe the name *everywhere* is enable-gpios.


Best regards,
Krzysztof