[PATCH v1 2/3] arm64: dts: mt7986: change cooling trips

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>

Add Critical and hot trips for emergency system shutdown and limiting
system load.

Change passive trip to active to make sure fan is activated on the
lowest trip.

Fixes: 1f5be05132f3 ("arm64: dts: mt7986: add thermal-zones")
Suggested-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 207510abda89..36d8945400df 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -614,22 +614,34 @@ cpu_thermal: cpu-thermal {
 			thermal-sensors = <&thermal 0>;
 
 			trips {
+				cpu_trip_crit: crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
 				cpu_trip_active_high: active-high {
 					temperature = <115000>;
 					hysteresis = <2000>;
 					type = "active";
 				};
 
-				cpu_trip_active_low: active-low {
+				cpu_trip_active_med: active-med {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "active";
 				};
 
-				cpu_trip_passive: passive {
-					temperature = <40000>;
+				cpu_trip_active_low: active-low {
+					temperature = <60000>;
 					hysteresis = <2000>;
-					type = "passive";
+					type = "active";
 				};
 			};
 		};
-- 
2.34.1