Re: [PATCH v2 3/4] net: stmmac: Add glue layer for Loongson-1 SoC

[Andrew Lunn]

> +static int ls1b_dwmac_syscon_init(struct plat_stmmacenet_data *plat)
> +{
> +	struct ls1x_dwmac *dwmac = plat->bsp_priv;
> +	struct regmap_field **regmap_fields = dwmac->regmap_fields;
> +
> +	if (plat->bus_id) {
> +		regmap_field_write(regmap_fields[GMAC1_USE_UART1], 1);
> +		regmap_field_write(regmap_fields[GMAC1_USE_UART0], 1);
> +
> +		switch (plat->phy_interface) {
> +		case PHY_INTERFACE_MODE_RGMII:
> +			regmap_field_write(regmap_fields[GMAC1_USE_TXCLK], 0);
> +			regmap_field_write(regmap_fields[GMAC1_USE_PWM23], 0);
> +			break;

What about the other three RGMII modes? Plain rgmii is pretty unusual,
rgmii-id is the most used.

> +		case PHY_INTERFACE_MODE_MII:
> +			regmap_field_write(regmap_fields[GMAC1_USE_TXCLK], 1);
> +			regmap_field_write(regmap_fields[GMAC1_USE_PWM23], 1);
> +			break;
> +		default:
> +			dev_err(dwmac->dev, "Unsupported PHY mode %u\n",
> +				plat->phy_interface);
> +			return -EOPNOTSUPP;
> +		}
> +
> +		regmap_field_write(regmap_fields[GMAC1_SHUT], 0);
> +	} else {
> +		switch (plat->phy_interface) {
> +		case PHY_INTERFACE_MODE_RGMII:
> +			regmap_field_write(regmap_fields[GMAC0_USE_TXCLK], 0);
> +			regmap_field_write(regmap_fields[GMAC0_USE_PWM01], 0);
> +			break;

same here.

     Andrew