[PATCH v2] dt-bindings: interrupt-controller: loongson,liointc: Fix warnings about liointc-2.0

[Binbin Zhou]

Since commit f4dee5d8e1fa ("dt-bindings: interrupt-controller: Add
Loongson-2K1000 LIOINTC"), the loongson liointc supports configuring
routes for 64-bit interrupt sources.

For liointc-2.0, we need to define two liointc nodes in dts, one for
"0-31" interrupt sources and the other for "32-63" interrupt sources.
This applies to mips Loongson-2K1000.

Unfortunately, there are some warnings about "loongson,liointc-2.0":
1. "interrupt-names" should be "required", the driver gets the parent
interrupts through it.

2. Since not all CPUs are multicore, e.g. Loongson-2K0500 is a
single-core CPU, there is no core1-related registers. So "reg" and
"reg-names" should be set to "minItems 2".

3. Routing interrupts from "int0" is a common solution in practice, but
theoretically there is no such requirement, as long as conflicts are
avoided. So "interrupt-names" should be defined by "pattern".

This fixes dtbs_check warning:

DTC_CHK arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dtb
arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dtb: interrupt-controller@1fe11440: interrupt-names:0: 'int0' was expected
      From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dtb: interrupt-controller@1fe11440: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
      From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml

Fixes: f4dee5d8e1fa ("dt-bindings: interrupt-controller: Add Loongson-2K1000 LIOINTC")
Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
---
V2:
1. Update commit message;
2. "interruprt-names" should be "required", the driver gets the parent
interrupts through it;
3. Add more descriptions to explain the rationale for multiple nodes;
4. Rewrite if-else statements.

Link to V1:
https://lore.kernel.org/all/20230815084713.1627520-1-zhoubinbin@xxxxxxxxxxx/

 .../loongson,liointc.yaml                     | 74 +++++++++----------
 1 file changed, 37 insertions(+), 37 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
index 00b570c82903..f695d3a75ddf 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
@@ -11,11 +11,11 @@ maintainers:
 
 description: |
   This interrupt controller is found in the Loongson-3 family of chips and
-  Loongson-2K1000 chip, as the primary package interrupt controller which
+  Loongson-2K series chips, as the primary package interrupt controller which
   can route local I/O interrupt to interrupt lines of cores.
-
-allOf:
-  - $ref: /schemas/interrupt-controller.yaml#
+  In particular, the Loongson-2K1000/2K0500 has 64 interrupt sources that we
+  need to describe with two dts nodes. One for interrupt sources "0-31" and
+  the other for interrupt sources "32-63".
 
 properties:
   compatible:
@@ -24,15 +24,9 @@ properties:
       - loongson,liointc-1.0a
       - loongson,liointc-2.0
 
-  reg:
-    minItems: 1
-    maxItems: 3
+  reg: true
 
-  reg-names:
-    items:
-      - const: main
-      - const: isr0
-      - const: isr1
+  reg-names: true
 
   interrupt-controller: true
 
@@ -45,11 +39,9 @@ properties:
   interrupt-names:
     description: List of names for the parent interrupts.
     items:
-      - const: int0
-      - const: int1
-      - const: int2
-      - const: int3
+      pattern: int[0-3]
     minItems: 1
+    maxItems: 4
 
   '#interrupt-cells':
     const: 2
@@ -69,32 +61,41 @@ required:
   - compatible
   - reg
   - interrupts
+  - interrupt-names
   - interrupt-controller
   - '#interrupt-cells'
   - loongson,parent_int_map
 
-
 unevaluatedProperties: false
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - loongson,liointc-2.0
-
-then:
-  properties:
-    reg:
-      minItems: 3
-
-  required:
-    - reg-names
-
-else:
-  properties:
-    reg:
-      maxItems: 1
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - loongson,liointc-2.0
+    then:
+      properties:
+        reg:
+          minItems: 2
+          items:
+            - description: Interrupt routing registers.
+            - description: Low/high 32-bit interrupt status routed to core0.
+            - description: Low/high 32-bit interrupt status routed to core1.
+        reg-names:
+          minItems: 2
+          items:
+            - const: main
+            - const: isr0
+            - const: isr1
+      required:
+        - reg-names
+    else:
+      properties:
+        reg:
+          maxItems: 1
 
 examples:
   - |
@@ -113,7 +114,6 @@ examples:
                                 <0x0f000000>, /* int1 */
                                 <0x00000000>, /* int2 */
                                 <0x00000000>; /* int3 */
-
     };
 
 ...
-- 
2.39.3