Re: [PATCH v6 1/5] dt-bindings: PCI: brcmstb: Add brcm,enable-l1ss property

[Jim Quinlan]

On Mon, Aug 21, 2023 at 10:47 AM Lorenzo Pieralisi
<lpieralisi@xxxxxxxxxx> wrote:
>
> On Fri, Jun 23, 2023 at 10:40:54AM -0400, Jim Quinlan wrote:
> > This commit adds the boolean "brcm,enable-l1ss" property:
> >
> >   The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
> >   requires the driver probe() to deliberately place the HW one of three
> >   CLKREQ# modes:
> >
> >   (a) CLKREQ# driven by the RC unconditionally
> >   (b) CLKREQ# driven by the EP for ASPM L0s, L1
> >   (c) Bidirectional CLKREQ#, as used for L1 Substates (L1SS).
> >
> >   The HW+driver can tell the difference between downstream devices that
> >   need (a) and (b), but does not know when to configure (c).  All devices
> >   should work fine when the driver chooses (a) or (b), but (c) may be
> >   desired to realize the extra power savings that L1SS offers.  So we
> >   introduce the boolean "brcm,enable-l1ss" property to inform the driver
> >   that (c) is desired.  Setting this property only makes sense when the
> >   downstream device is L1SS-capable and the OS is configured to activate
> >   this mode (e.g. policy==powersupersave).
> >
> >   This property is already present in the Raspian version of Linux, but the
> >   upstream driver implementation that follows adds more details and
> >   discerns between (a) and (b).
> >
> > Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > ---
> >  Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > index 7e15aae7d69e..8b61c2179608 100644
> > --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > @@ -64,6 +64,15 @@ properties:
> >
> >    aspm-no-l0s: true
> >
> > +  brcm,enable-l1ss:
> > +    description: Indicates that PCIe L1SS power savings
> > +      are desired, the downstream device is L1SS-capable, and the
> > +      OS has been configured to enable this mode.  For boards
>
> What does this mean ? I don't think DT properties are supposed
> to carry information related to how the OS is configured.

The DT setting in question is unrelated to the statement "and the OS
has been configured to
enable this mode".

This is merely saying that even if you enable "brcm,l1ss-enable"
that you may not get L1SS power savings w/o setting
"CONFIG_PCIEASPM_POWER_SUPERSAVE=y".
I mentioned that exact term but a reviewer nakked it because
apparently DT descriptions should not be OS specific.

I am actually open for this to be a command-line option but I wanted to honor
what the Raspian OS folks have already done.  RaspianOS already has
"brcm,enable-l1ss"
set in their DTS files.

Regards,
Jim

> Again - it depends on what DT should be used for, I am not claiming to
> have any authority on that, just asking.
>
> Thanks,
> Lorenzo
>
> > +      using a mini-card connector, this mode may not meet the
> > +      TCRLon maximum time of 400ns, as specified in 3.2.5.2.2
> > +      of the PCI Express Mini CEM 2.0 specification.
> > +    type: boolean
> > +
> >    brcm,scb-sizes:
> >      description: u64 giving the 64bit PCIe memory
> >        viewport size of a memory controller.  There may be up to
> > --
> > 2.17.1
> >
>
>

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature