Re: [PATCH] remoteproc: pru: add support for configuring GPMUX based on client setup

[Mathieu Poirier]

On Wed, Aug 02, 2023 at 12:19:25PM +0530, MD Danish Anwar wrote:
> From: Tero Kristo <t-kristo@xxxxxx>
> 
> The GPMUX config value for a PRU device can now be configured by client
> by specifying it in the device node ti,pruss-gp-mux-sel.
> 
> Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
> Signed-off-by: Suman Anna <s-anna@xxxxxx>
> Signed-off-by: MD Danish Anwar <danishanwar@xxxxxx>
> ---
>  drivers/remoteproc/pru_rproc.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>

Applied.

Thanks,
Mathieu

> diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
> index 5b2dc75836fc..327f0c7ee3d6 100644
> --- a/drivers/remoteproc/pru_rproc.c
> +++ b/drivers/remoteproc/pru_rproc.c
> @@ -110,6 +110,7 @@ struct pru_private_data {
>   * @dbg_single_step: debug state variable to set PRU into single step mode
>   * @dbg_continuous: debug state variable to restore PRU execution mode
>   * @evt_count: number of mapped events
> + * @gpmux_save: saved value for gpmux config
>   */
>  struct pru_rproc {
>  	int id;
> @@ -128,6 +129,7 @@ struct pru_rproc {
>  	u32 dbg_single_step;
>  	u32 dbg_continuous;
>  	u8 evt_count;
> +	u8 gpmux_save;
>  };
>  
>  static inline u32 pru_control_read_reg(struct pru_rproc *pru, unsigned int reg)
> @@ -229,6 +231,7 @@ struct rproc *pru_rproc_get(struct device_node *np, int index,
>  	struct device *dev;
>  	const char *fw_name;
>  	int ret;
> +	u32 mux;
>  
>  	rproc = __pru_rproc_get(np, index);
>  	if (IS_ERR(rproc))
> @@ -253,6 +256,23 @@ struct rproc *pru_rproc_get(struct device_node *np, int index,
>  	if (pru_id)
>  		*pru_id = pru->id;
>  
> +	ret = pruss_cfg_get_gpmux(pru->pruss, pru->id, &pru->gpmux_save);
> +	if (ret) {
> +		dev_err(dev, "failed to get cfg gpmux: %d\n", ret);
> +		goto err;
> +	}
> +
> +	/* An error here is acceptable for backward compatibility */
> +	ret = of_property_read_u32_index(np, "ti,pruss-gp-mux-sel", index,
> +					 &mux);
> +	if (!ret) {
> +		ret = pruss_cfg_set_gpmux(pru->pruss, pru->id, mux);
> +		if (ret) {
> +			dev_err(dev, "failed to set cfg gpmux: %d\n", ret);
> +			goto err;
> +		}
> +	}
> +
>  	ret = of_property_read_string_index(np, "firmware-name", index,
>  					    &fw_name);
>  	if (!ret) {
> @@ -291,6 +311,8 @@ void pru_rproc_put(struct rproc *rproc)
>  
>  	pru = rproc->priv;
>  
> +	pruss_cfg_set_gpmux(pru->pruss, pru->id, pru->gpmux_save);
> +
>  	pru_rproc_set_firmware(rproc, NULL);
>  
>  	mutex_lock(&pru->lock);
> -- 
> 2.34.1
>